Toro owner manual SA41 Electrical Specifications, Demand Start Section

SA41 ELECTRICAL SPECIFICATIONS

INVERTER TYPE PWM Full bridge power stage, with true sine wave AC output.

DEMAND START SECTION
Type:		Pulsing AC
Minimum Load Power to start (User adjustable):		3W to 20W
Maximum response time:		1 sec
Standby current from battery (Average):		60mA
BATTERY VOLTAGE RANGE
Low DC Volts Disconnect (Instantaneous):		34V
Low DC Volts Cutout (Delayed, User Adjustable):		38-44V
Low DC Volts Cut-in (Delayed, User Adjustable):		44.4-52V
High DC Volts Cutout (Instantaneous, User Adjustable):		60-68V
High DC Volts Disconnect (Instantaneous):		70V
TOTAL APPLIANCE RATING AT	25°C	40°C
Continuous:	3000W	2800W
30 Minute rating:	4700W	4400W
5 Minute rating:	5300W
1 Minute rating:	6500W
Surge rating:	8500W
INVERTER EFFICIENCY
Peak (at 500W):		91%
No load power consumption (C0NT mode):		0.66 A
MISCELLANEOUS SPECIFICATIONS
Output Frequency Accuracy:		50Hz ± 0.001 %
Output Voltage Accuracy (0 - 2200W)		240V ± 4 %
Total Harmonic Distortion (THD)		< 4 %
Control Outputs 1 & 2, max DC sinking current:		50 mA
Alarm Inputs 1 & 2, input switching level:		HI > 3 V
		LO < 1 V
Operating temperature range:		-10°C to 50°C
Weight:		32 kg

DC Input is Electrically Isolated from AC Output

Note: Through a policy of continued development, specifications are subject to change without notice.

The above specifications are based on unity power factor.

18