Pioneer CDJ-400 manual Scratch Jog Effect, Digital Jog Break, Change playback speed

Page 16

OPERATIONS (DJ PLAYER OPERATIONS)

SCRATCH

JOG EFFECT

DIGITAL

JOG BREAK/

REV

CUE

VINYL

HOLD

VINYL

TEMPO 6/ 10/ 16/WIDE

MASTER

TEMPO

Scratch Jog Effect

Press one of the SCRATCH JOG EFFECT buttons (BUBBLE, TRANS, WAH) during playback while in VINYL mode.

The effect is produced only while scratching.

BUBBLE

Produces a bubbly sound effect, simulating the bubble scratch tech- nique.

TRANS

Produces an effect resembling sound muted with the mixer’s cross fader.

WAH

Produces an effect resembling the wah-wah pedal used for guitars.

Digital Jog Break

Press one of the DIGITAL JOG BREAK buttons (JET, ROLL, WAH) during playback while in CDJ mode.

The selected effect will appear in the display, and the effect will change corresponding to the degree of rotation of the jog dial.

TEMPO control slider

Change playback speed

Sliding the TEMPO Control slider forward and back.

By sliding the lever towards you (+) increases the tempo; sliding the lever away from you (–) decreases the tempo. The center detent posi- tion is the normal speed.

The rate of change in playback speed (tempo) is shown in the dis- play.

The playback speed can be changed without changing the pitch (☞”Applying master tempo”).

7Selecting range of tempo adjustment

Press the TEMPO ±6/±10/±16/WIDE button.

Each time the button is pressed, the variable range of the TEMPO control slider alternates between ±6 %, ±10 %, ±16 % and WIDE. The tempo can be adjusted in units of 0.02 % when set to ±6 %, units of

0.05% when set to either ±10 % or ±16 %, and units of 0.5 % when set to WIDE.

The variable tempo range for MP3s is ±6 %/±10 %/±16 %.

The set variable range will be shown in the display.

The tempo range will be saved in memory when the power is turned off.

Applying master tempo

Press the MASTER TEMPO button during playback.

The MASTER TEMPO button and the [MT] indicator in the display will light, and the speed (tempo) can be changed using the TEMPO con- trol slider without changing the pitch (key).

Due to digital processing of the sound, the sound quality will drop.

The setting will be saved in memory when the power is turned off.

JET

Changes the delay time in response to rotation of the jog dial, and adds a short delay sound to the original, thereby causing an interfer- ence between the sounds and creating a “swooshing” effect.

The delay time corresponds to the jog dial’s rotation and changes between 0 ms (when jog dial is completely stopped) to a maxi- mum of 3 ms.

When removing hand from jog dial, the sound will gradually settle back into the original sound.

The setting is canceled when the disc is ejected.

ROLL

The playback sound will be affected with pitch and playback time var- ied in response to the rotation of the jog dial.

When the jog dial was touched, audio will be loop-played then rolled.

When removing hand from jog dial, the sound will gradually settle back into the original sound.

The setting is canceled when the disc is ejected.

ROLL cannot be performed during reverse playback.

WAH

Adds a filter with cutoff frequency that changes in response to jog dial rotation.

The filter changes into a high-pass filter when the jog dial is turned clockwise; the filter changes into a low-pass filter when the jog dial is turned counterclockwise.

When removing hand from jog dial, the sound gradually settle back into the original sound.

The setting is canceled when the disc is ejected.

[HOLD function]

Used to maintain the effect that has been created by the turning of the jog dial even after the jog dial’s rotation is stopped.

Press the HOLD button during usage of Digital Jog Break or Scratch Jog Effect function.

If you remove hand from jog dial, the effect at that point will be maintained.

When the HOLD function is turned ON, even if another effect is selected, the setting prior to the new effect selection will be pre- served in memory so long as hold is not turned off.

16

<DRB1452> En

Page 15 Page 17
Image 16
Page 15 Page 17
Contents CDJ-400 Region Plug type For European type region AC power cordOperating Environment Features Before Operating FeaturesEquipped with Scratch Jog Effect for new scratch sounds Equipped with Digital Jog Break for original sound effectsContents Discs Usable with this Unit Types of discs playable on this unitPlaying MP3 files Before Operating Discs Usable with this UnitTo disconnect a USB memory device Playing Tracks from USB memoryAbout CD-ROM playback Before Operating Cautions Regarding Handling Connecting control cable for relay play When connecting to a DJ mixer DJM-400Connections Before Operating ConnectionsConnecting to other devices Connecting the power cordConnecting to a stereo amplifier when not using a DJ mixer Connecting to a component with digital input connectorsPanel Facilities Before Operating Panel FacilitiesRear Panel Display RemainTempo WideForced disc ejection Disc LOADING/UNLOADINGOperations Disc LOADING/UNLOADING DJ Player Operations Track cueing Jog dial functionsRotary search Fast-forward/fast-reverseScratch Jog Effect Digital Jog BreakChange playback speed Applying master tempoCue point settings Mixing different tracksAdvanced Operations Relay play using two players Writing and reading data Cue point/loop point memoryMidi Setting Setting the Midi channelOperations Midi Detting Change the channel by turning the rotary dialTroubleshooting Other TroubleshootingSymptom Cause Remedy Pressing the OUT/OUT AdjustSpecifications Error message displayAccessories GeneralEnglish Cable de alimentación de CA Español AC電源線Características Antes DE LA Operación CaracterísticasÍndice Limitación de responsabilidadesAntes DE LA Operación Operaciones刮片音效 數字緩動休歇緩動轉盤 反向播放接力播放 操作之前Discos Utilizables CON Esta Unidad Tipos de discos reproducibles en esta unidadReproducción de archivos MP3 Antes DE LA Operación Discos Utilizables CON Esta UnidadDesconexión de un dispositivo de memoria USB Reproducción de pistas desde la memoria USBAcerca de la reproducción de discos CD-ROM 可在本機上播放的光碟類型 播放MP3檔案操作之前可配合本機使用的光碟 可播放光碟的類型及圖標拔除 USB 記憶體裝置 播放 USB 記憶體的曲目光碟播放功能 Precauciones Relativas AL Manejo Antes DE LA Operación Precauciones Relativas AL Manejo操作之前使用注意事項 安放場所 光碟的保存安裝時注意事項 清潔及使用光碟時Conexiones De ControlAntes DE LA Operación Conexiones / 操作之前接續 連接 Pioneer DJ 混音器Conexión del cable de control para reproducción por relevos 接續控制電纜線以操作接力播放附件的控制電纜線 Cable de control suministradoConexión a otros dispositivos 與其他機件接續音響放大器 與一個備有數字輸入插孔機件接續時Conexión del cable de alimentación 與電纜線接續時Conexión a un ordenador 連接電腦Interruptor de la alimentación Power -OFF/ on Power 開關（-OFF/ONAntes DE LA Operación Dispositivos DEL Panel / 操作之前板面配屬 Visualizador P.44 Botón de retroceso de carpeta Back15. 音碟指示燈 14. 光碟裝入夾16. 強制排出穴 Botones de búsqueda de pistas Track Search 4, ¢ Search 按鍵 1，¡Track Search 按鍵（4，¢） 23.反向按鈕 （DIRECTION REV）（P.60）Panel posterior Text MODE/UTILITY Mode後面板 Visualizador 三段式顯示幕二段式顯示幕 11. 點矩陣顯示幕 （7 x 5） xAcerca de la visualización de texto Text 時間顯示關於TEXT文字顯示 Extracción de la lámina del mando de lanzaderaINSERCIÓN/EXPULSIÓN DE Discos Expulsión forzada del discoOperaciones INSERCIÓN/EXPULSIÓN DE Discos Precaución操作（光碟裝入/取出） 光碟強制排出注意： Función de localización automática 自動指令功能Cambio del nivel de la localización automática 變更 Auto Cue 等級Inicio de la reproducción Función de reanudaciónPara detener la reproducción Para interrumpir temporalmente la reproducciónFunciones del mando de lanzadera 緩動轉盤功能Avance rápido/inversión rápida Localización de pistas快速向前／快速倒退 音軌指令轉盤搜尋 Búsqueda por rotaciónTrack Search 按鍵（4， ¢）同時旋轉緩動轉盤 Cambio de la velocidad de reproducción Aplicación del tempo principal變更播放速度 施加主拍子Efecto de rascado del mando de lanzadera Interrupción de mando de lanzadera digitalFunción de retención Hold Hold 功能Ajuste de puntos de localización 指令點的設定Ajuste de la localización en el modo CDJ Cambio del punto de localización混合多種音軌 Mezcla de pistas distintasVinyl 模式中設定 Cue 點 Reproducción con inicio de fundido Reproducción de mezcla largaPresione el botón CUE del reproductor CD2 Reproducción de bucle 循環播放創造一個循環 使用自動設定循環輸出點（自動節拍循環）以開始循Reproducción con inicio de fundido 在循環播放進行中回到循環輸入點以重新開始循環播 （熱循環）（HOT LOOP）退出循環播放 改變循環輸出點Reproducción con rotación Reproducción rascadaReproducción en inversión Memoria de puntos de localización/ puntos de bucle 提示點/循環點記憶錄製提示點 錄製循環點Reproducción con relevo empleando dos reproductores Escritura y lectura de datos利用兩個雷射唱機實行接力播放 寫入與讀取資料讀取 USB 記憶體裝置資料 在沒有連接 USB 記憶體裝置或放入碟片的情況下，持續按住Ajustes DE Midi Operaciones Ajustes DE MidiAjuste del canal Midi Cambie el canal girando el mando rotativo按住 Text MODE/UTILITY Mode 按鈕 1 秒鐘（或以上），可進入公用程式設定模式。 操作（MIDI 設定）設定 Midi 頻道 轉動轉盤變更頻道。Otros Solución DE Problemas Solución DE ProblemasSíntoma Causa probable Remedio Presentación de mensajes de error EspecificacionesGeneralidades Accesorios故障查找 ÷ 按 PLAY/PAUSE 鍵6。故障顯示 音響部份Mpeg Layer-3音頻編碼技術經Fraunhofer IIS和Thomason multimedia公司授權使用。
Related manuals
Manual 10 pages 9.11 Kb

CDJ-400 specifications

The Pioneer CDJ-400 is a groundbreaking digital media player that has significantly shaped the landscape of DJing since its release. It combines advanced technology, user-friendly features, and compatibility with various audio formats, making it a popular choice among both novice and professional DJs.

One of the standout features of the CDJ-400 is its ability to play multiple audio formats, including MP3, WAV, and AAC files. This flexibility allows DJs to mix and match tracks from various sources, whether they come from CDs, USB drives, or even laptops through a FireWire connection. The USB connectivity enables easy access to music libraries, allowing for seamless transitions and virtually limitless track selection.

The CDJ-400 incorporates a 4.3-inch color LCD screen that displays crucial track information such as elapsed time, remaining time, and waveform graphics. This intuitive interface enhances a DJ's ability to visualize their mixes and make informed decisions on the fly. The player also features a jog wheel that is not only touch-sensitive but also allows for precise manipulation of tracks, whether for scratching or pitch bending.

Another notable feature is the built-in effects processor, which gives DJs the creative tools to enhance their performances. The CDJ-400 offers various effects such as looping, reverse play, and even a beat loop function, allowing for dynamic mixing possibilities. Additionally, the unit's MIDI control capability enables seamless integration with DJ software, expanding the range of performance options.

The unit’s compact design does not compromise on build quality. With a sturdy chassis and a layout that emphasizes functionality, the CDJ-400 is designed to withstand the rigors of regular use in club environments. Furthermore, its ergonomic setup facilitates quick access to essential controls, ensuring that DJs can stay focused on their performance without fumbling with settings.

The Pioneer CDJ-400 is a perfect bridge for DJs seeking to transition from traditional vinyl to digital formats. Its combination of advanced technology with ease of use makes it an invaluable tool for those looking to elevate their DJing skills. Overall, the CDJ-400 stands as a testament to Pioneer's commitment to innovation in the DJ industry, offering powerful features in a compact package.
Top Page Image Contents