Regency IG35-NG, IG35-LPG, IG35-ULPG LOG SET Installation, Lava Rock, EmbersEmbers

INSTALLATION

LOG SET

INSTALLATION

Read the instructions below carefully and refer to the diagrams. If logs are broken do not use the unit until they are replaced.

Log kit #730-935 contains the following:

a)02-65 Rear Log

b)02-56 Middle Left Log

c)02-44 Front Left Log

d)02-46 Left Top Log

e)02-45 Front Right Log

f)02-47 Center Log

g)02-48 Middle Right Log

h)	Embers	902-151
i)	Lava	902-154

Log kit #486-930 contains the following:

a)02-50 Side Log

b)02-52 Side Log

c)	Embers	902-151
d)	Lava	902-154

The "02" refer numbers (i.e. 02-65) are

molded into the rear of each log.

3) Place Rear Log A)02-65 on the two pins on	7) Place the Left Top Log D)02-46 on the pin
the rear log support.	on Log B)02-56 and on top of the cutout
	on Log A)02-65.

A)02-65

A)02-65

D)02-46

B)02-56

C)02-44

4)Place the Middle Left Log B)02-56 on the two pins from the rear left side.

8) Place Front Right Log E)02-45 on the two pins as shown.

B)02-56

E)02-45

Installation of Kit 730-935:

1)Carefully remove the logs from the box and unwrap them. The logs are fragile, handle with care - do not force into position.

2)Sprinkle the embers on the front, left and right sides of the firebox base.

5)Place lava rock in front of middle left log as shown in the picture.

9) Place the lava rock in the area between the left and right logs, leaving a space in the middle for log (F) 02-47.

Ensure that the lava rocks are not placed

directly over the burner ports.

6)Place Front Left Log C)02-44 onto the 2 front pins as shown.

Lava Rock

C)02-44

EmbersEmbers

Regency IG35 Gas Inbuilt Fireplace 13