INSTALLATION
Thermodisc Installation:
14)Install the heat defl ector to the unit by fi tting the tabs into the tab brackets located on the underside of the fi rebox. See diagram 11. Diagram 12 shows defl ector completely installed.
16)Secure the faceplate in place using 2 screws on the left and right side. Diagram 14 shows mounting on right side.
Tab into Tab Bracket
Diagram 11 | Heat Defl ector | Diagram 14 |
|
Diagram 12
Faceplate Installation:
15)Completely mount the faceplate to the unit. .See diagram 13.
Diagram 13
Wiring:
17)Remove the wire harness from the valve. See diagram 15.
Wire Harness | Valve |
Diagram 15
18)Undo the wire clip to the right side of the valve. See diagram 16.
Diagram 16
18 | Regency IG35 Gas Inbuilt Fireplace |