Regency IG35-ULPG, IG35-LPG, IG35-NG installation manual Hinge Bracket, Bottom Louver

INSTALLATION

25)Secure all loose wires in the wire clip to the right side of the valve. See diagram 23.

Diagram 23

Screen Door Installation:

28)Re-install the glass door.

29)Install the screen by placing the hooks (2 on each side) into the slots on the inside of the faceplate. Once in place, push down on the screen to secure. See diagram 26.

Louver Installation:

26)Secure the hinge bracket and hinge to the outside of the fi rebox fl ange on the left and right side as shown using 2 screws on each side. See diagram 24.

Hinge Bracket Hinge

Diagram 24

27)Align the bottom louver hinge tab screw holes with hinge screw holes and secure using 3 screws on each side. See diagram 25.

Bottom Louver

Diagram 25

Diagram 26

30)Close the bottom louver.

31)Plug in the power source.

NOTE:

The fan should run at least on low speed to prevent the unit from overheating which will cause automatic shutdown via the thermodisc safety switch.

20 Regency IG35 Gas Inbuilt Fireplace