Regency IG35-LPG, IG35-NG, IG35-ULPG installation manual Installation

Page 12

INSTALLATION

16)Turn on gas supply and plug in power cord.

17)Adjusting the Outlet Pressure

All the adjustments must be carried out in the following order:

Remove the modulator plastic cap (A) using needle nose pliers.

Maximum pressure: Turn the unit ON to its highest input rating. Screw in the nut (B) to increase the outlet pressure and screw it out to decrease it. Use a 10 mm wrench.

NOTE: The outlet pressure must be set to maximum 2.61 kPa.

Minimum pressure: Remove one of the cables connected to the electric modulator. While holding the nut (B) with a wrench, screw in the screw (C) to increase the pressure and screw it out to decrease it. Use a screwdriver 6 x 1 blade.

NOTE: The outlet pressure must be set to minimum 0.75 kPa.

After carrying out all adjustments, block the setting screws with paint, taking care not to obstruct the breather orifice of the pressure.

Put back the modulator plastic cap.

WARNING: To ensure the correct opera- tion of the modulator it is necessary that the plastic cap (A) is returned to its original location.

A

BC

Cable

Electric

Modulator

18)At the end of all setting and adjustment operations, check electrical installation and gas leaks.

19)Check operation of flame control.

20)Check for proper flame appearance and glow on logs.

Installer Notice:

These instructions must be left with the appliance.

12

Regency IG35 Gas Inbuilt Fireplace

Image 12
Contents Manual Please Keep These Instructions For Future ReferenceUnit Dimensions Regency GAS Inbuilt FireplaceRegency IG35 Gas Inbuilt Fireplace Table of Contents Data Badge Installation Minimum Fireplace Dimensions Minimum Clearances to CombustiblesGAS Connection Premium Flush Front FramingGAS Pipe Pressure Testing FlueingAeration Settings Aeration SettingMax. Input Min. InputAntenna Control Box Cover Jumper Location Heat ShieldAdjusting the Outlet Pressure Cable Electric ModulatorConversion Kit #486-967 for NG to Ulpg Installation LOG SET Installation Lava RockEmbersEmbers With care do not force into position Notch CutoutExample NotchFaceplate Trim & Louver Installation Diagram SideScreen Bracket Slots Premium Flush Front Installation Faceplate CAT5 CableWire Harness Tab into Tab BracketHeat Defl ector Wire Harness Removed Bracket Diagram Regency IG35 Gas Inbuilt FireplaceIgnition Module Hinge Bracket Bottom LouverRemote Control WiringFinal Check Wiring with Premium Flush Front Option Operating Instructions Copy of Lighting Instruction Plate Normal Operating Sounds GAS AppliancesMaintenance Maintenance InstructionsDoor Glass Replacement LOG ReplacementFAN Maintenance To Remove FanBack Clip Removing Valve Tray Parts List Electronic Components Parts List910-084 Main Assembly Burner Assembly & LOG SETDescription Faceplate Assembly Premium Flush Front AssemblyWarranty Warranty LifetimeConditions Exclusions

IG35-LPG, IG35-ULPG, IG35-NG specifications

The Regency IG35-NG, IG35-ULPG, and IG35-LPG represent a trio of advanced heating solutions designed to cater to various fuel types while maintaining efficiency and user comfort. These units are ideal for modern residences and commercial spaces, showcasing technological advancements in the heating sector.

The IG35-NG operates on natural gas, offering an environmentally friendly solution with lower emissions compared to traditional heating methods. Its ability to provide consistent heat while being energy efficient makes it an attractive option for both new builds and retrofits. Featuring an automatic ignition system, the IG35-NG ensures quick and hassle-free operation, allowing users to enjoy immediate warmth.

For those in regions where propane is more accessible, the IG35-ULPG caters specifically to ultra-low propane gas environments. This model boasts similar performance metrics to the IG35-NG but is optimized for utilizing propane under lower pressure. The advanced burner technology employed in the IG35-ULPG tracks combustion efficiency and significantly reduces fuel consumption, making it both cost-effective and eco-friendly.

The IG35-LPG, on the other hand, is tailored for standard liquefied petroleum gas applications. Ideal for areas lacking natural gas infrastructure, this model ensures that users can still benefit from efficient heating solutions. The IG35-LPG incorporates sophisticated safety features, including flame failure detection and automatic shut-off systems. This ensures peace of mind for users by minimizing risks related to gas leaks and other potential hazards.

All three models share a sleek design, fitting seamlessly into various interior aesthetics. The compact size enhances installation flexibility, allowing these heaters to fit into spaces where traditional heating units may not suffice. Moreover, they come equipped with user-friendly controls that facilitate easy adjustments to temperature settings, ensuring optimal comfort during cold seasons.

In terms of energy efficiency, these heaters carry exceptional ratings, which may even qualify them for rebates and incentives in many regions. The advanced heat exchanger technology employed in these units allows for maximum heat transfer while minimizing waste, thus serving the dual purpose of reducing heating costs and environmental impact.

Overall, the Regency IG35 series presents a versatile and efficient lineup of heating solutions. With their modern technologies, user-centric features, and commitment to safety and efficiency, the IG35-NG, IG35-ULPG, and IG35-LPG represent the next generation of heating for both residential and commercial applications.