Regency IG35-ULPG, IG35-LPG, IG35-NG With care do not force into position, Notch Cutout, Example

INSTALLATION

10)Place the notch in Center Log F)02-47 over Log E)02-45 and across the cutout on Log A)02-65.

Installation of Kit 486-930:

1) Carefully remove the logs from the box and

unwrap them. The logs are fragile, handle

with care - do not force into position.

4)Place Side Log 02-52 on the left side of the grate on the firebox base.

Position log as desired ensuring the log DOES NOT interfere with flame. Possible positioning shown in diagrams below.

F)02-47

A)02-65

2)	Sprinkle the embers on the front, left and
	right sides of the firebox base.
3)	Place Side Log 02-50 on the right side of
	the grate on the firebox base.

E)02-45

Notch Cutout

Position log as desired ensuring the log

DOES NOT interfere with the flame. Possible

positioning shown in diagrams below.

02-52

11)Position notch in Front Right Log G)02-48 on Log F)02-47 and push the bottom right edge against the bracket on the burner tray.

02-50

A)02-65 G)02-48

Example 1

E)02-45

Notch

	G)02-48
E)02-45	02-50

Example 1

02-52

Example 2

Side View

Bracket

The bottom right edge of Log G)02-48 must

sit snugly against the bracket

12)Test fire to ensure proper light off. Ensure flame flows smoothly from one end of the burner to the other. If there is any flame hesitation, check the area for any blockage of the burner port.

Example 2

02-50

02-52

Example 3

5)Test fire to ensure proper light off. Ensure flame flows smoothly from one end of the burner to the other. If there is any flame hesitation, check the area for any blockage of the burner port.

Example 3

14 Regency IG35 Gas Inbuilt Fireplace