Assembly and Installation
Assembly and Installation
Infrared Burners
Figure 5
1.Disconnect or shut off the liquid propane or natural gas line connect to the grill, wait until the burners cool down.
2.Open the hood, remove the grate and flame tamer on top of the brass burner you want to replace (Fig- ure 6).
3.Through the access door underneath the grill, find the round stud and locking pin that locks the burner you want to replace (Figures 7 and 8).
Figure 6 | Figure 7 |
|
|
|
|
Figure 8
Page 10 | Barbecue Owner’s Manual |
|
www.calspas.com | 12/17/04 |