Operating the Cal Flame Entertainment Center
Erase/Add
When tuned to a channel press this button to store or erase the channel from memory. The stored channel numbers are displayed in GREEN on the screen and the no stored channel numbers are in RED.
AUTO PROGRAM Button
Select the regular channel broadcast TV or CABLE TV for AUTO PROGRAM. All the channel num- bers for TV or CABLE TV will be scanned. The broadcasting signals will be detected and automati- cally stored.
ENTER Button
Use this button to end the choice on the menu.
PICTURE SELECT Button
Each time this button is pressed the
BRIGHTNESS CONTRAST COLOR SHARPNESS TINT
Operation
1.Point the remote control directly at the TV Monitor.
2.Press the red power button located at the top left side of the remote control.
3.Allow a few seconds for the TV monitor to warm up before pressing any other buttons.
4.Once on, the TV monitor will display a small icon at the lower left side signifying which mode the TV is currently in.
5.Press the “SELECT” button located at the top right side of the TV remote control until the icon “COMPOSITE VIDEO” is displayed on the screen of the TV monitor. This will allow the TV Moni- tor to accept the signal from the DVD player.
6.When an antenna, cable or satellite system is connected to the coaxial cable on the right front side of the spa, you will be able to receive live TV signals by pressing the “SELECT” button until the “COMPOSITE TV” icon appears on the TV monitor. Allow a few second for the TV tuner to acquire the new signal prior to switching channels.
7.Press the right “VOL” button to adjust the volume up to “80” as displayed on the screen. This will allow the Stereo system to receive enough volume to reproduce the audio signal without distortion.
NOTE: You will not be able to hear audio form the TV Monitor itself. All audio signals for the TV or DVD are only acquired through the stereo when programmed to 88.7FM.
Adjusting the Picture
When watching the TV programs, the quality of the picture can be adjusted to suit your taste.
1.Press MENU. The main menu appears.
2.Press SELECT VIDEO. The video source appears. Press this button to access the AUDIO/VIDEO input jacks.
3.Select CLOSED CAPTION and then press ENTER. Closed captioning lets you display the audio por- tion of a program as text on the TV screen. This is useful to the hearing impaired or anyone who wants to watch a program without a sound. There are two types of closed captioning available: C1
Barbecue Owner’s Manual | Page 43 |
12/17/04 | www.calspas.com |