Assembly and Installation
Side Burners
1.Install side burner into an area of
2.Assemble a 3/8" pipe nipple to the 3/8" pipe tee using teflon tape or pipe sealant. Use only sealant that is approved for use on LP gas.
3.Install the pipe tee assembly to the grill intake pipe with pipe sealant. Tighten assembly and align the branch opening of the tee with the hole of the cabinet.
4.Connect the flexible hose (male end) to the pipe tee with pipe sealant.
5.Install and secure the side burner into the island by simply setting it in place.
6.Connect the female end of the flexible hose to the side burner intake pipe with pipe sealant.
7.Connect gas supply to the grill.
8.Check for gas leaks using soap water solution.
BARBECUE GASLINE
Items Included with Barbecue
1)"T" adapter (3/8")
2)2 each Hose 3/8" Fittings
3)Regulatorw/ Hose
"T" Adapter (3/8" Threaded) |
|
To grill, located | To side burner, located |
underneath and | |
behind grill | underneath behind burner. |
From Grill | From Side Burner |
| |
3/8" Fittings | To Propane Tank |
NOTE: You will need to use a gas rated sealer on all gas connectors (Tape, pipe dope, ect.)
Gas Line
AOpen barbecue door. Install hose with regulator on propane tank. Then connect other end to "T" adapter. Make sure to use gas rated tape seal when installing adapter to insure proper seal.
C
B 
Grill
A
BThen take other end of "T" adapter with hose attached and connect to end of male located underneath and at the back of the grill. (Use gas rated tape seal on all connections).
CConnect the last open line to the side burner (Use gas rated tape seal on all connections)
Figure 20. Side burner installation
Page 16 | Barbecue Owner’s Manual |
|
www.calspas.com | 12/17/04 |