Do not block access to the shutoff valve.The valve is for turning on or shutting off gas to the grill.
B
A
C
A. Gas supply line
B. Shutoff valve “open” position
C. To grill
LP Gas Conversion Using a Local LP Gas Supply
Conversion must be made by a qualified person. The installation of this grill must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NPFA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.
To convert to LP gas, the LP Gas Conversion Kit Part Number W10118099 must be used. Follow instructions included with kit.
A |
|
| B |
D | C |
|
A. Grill gas pipe
B. New CSA International approved “outdoor” flexible gas supply line
C. Rear of grill
D. To local LP gas supply
LP Gas Conversion Using a 20 lb LP Gas Fuel Tank
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A 20 lb LP gas fuel tank must be purchased separately.
INSTALLATION INSTRUCTIONS
Unpack Grill
WARNING
Excessive Weight Hazard
Use two or more people to move and install grill. Failure to do so can result in back or other injury.
■Unpack grill. Remove all packaging materials and remove grill from carton.
■Move grill close to desired outdoor location.
■Open the hood.
Remove Packaging Material Inside the Grill
3.Remove foam block and wrap from inside the grill.
A
B
A. Foam block
1.Cut the tiedowns holding the grates together.
2.Remove rotisserie skewer (on some models), warming shelf and grill grates from inside the grill and remove packaging material.
B. Foam wrap
4.Replace the grill grates.
5.Place warming shelf on brackets as shown.
B
A
A
A. Warming shelf brackets B. Warming shelf
9