Vertical Termination Cap |
CFM Vent Components
The following kits are available to meet the needs of most installations. All pipe has a 7” outer diameter and includes a 4” diameter inner section. A (CG) designa- tion indicates the part is finished in Charcoal Gray paint. Consult your dealer about other vent parts that may be appropriate to complete the installation.
Min. Through the Wall Vent Kit | 7TFSSK | |
(1) |
| |
(1) | 24” Straight pipe (CG) |
|
(1) | 24” - 42” Adjustable Straight Pipe |
|
(1) | Side Wall Termination |
|
(1) | Firestop |
|
(1) |
| |
(1) | Hardware package |
|
(1) | Finishing plate (CG) |
|
(1) | Finishing collar (CG) |
|
(4) | Charcoal Gray flue pipe rings |
|
Starter Kit for | 7TDVSKS | |
(1) | Snorkel Termination (7TDVSNORK) |
|
Vertical Termination Kit, | 7TDVSKVA |
(1)Combination Horizontal Offset / Roof Support
(1)Vertical Termination
(1)Storm Collar
(1)
(1)Finishing Plate (CG)
(1)Finishing Collar (CG)
(1)Polished Brass Flue Pipe Ring
(1)Hardware Package
Vertical Termination Kit, | 7TDVSKVB | |
(1) | 7/12 - 12/12 Flashing |
|
and all of the other Vertical Termination parts. |
| |
Vertical Termination, Flat Roof | 7DVSKVF | |
(1) | Flat Flashing |
|
Radiance Direct Vent Gas Heater
and all of the other Vertical Termination parts. |
| |
Twist Lock 12” Straight Pipe (CG) | 7TFSDVP12 | |
(1) | 12” |
|
Twist Lock 12” - 18” Adjustable Pipe | 7TFSDVP1218 | |
(1) | 12” - 18” Adjustable Pipe |
|
Twist Lock 24” Straight Pipe (CG) | 7TFSDVP24 | |
(1) | 24” |
|
Twist Lock 48” Straight Pipe (CG) | 7TFSDVP48 | |
(1) | 48” Nonadjustable Pipe |
|
Twist Lock | 7TFSDVT45 | |
for vertical offsets |
| |
(1) |
| |
Combination Offset/Roof Support | 7DVCS | |
Attic Insulation Shield | 7DVAIS | |
7” Charcoal Gray Pipe Rings, (4) | 7FSDRG | |
7” Polished Brass Pipe Rings (4) | 7FSDRP | |
Wall Thimble | 942G |
20012697 | 13 |