Teledyne operating instructions Model Designations, Introduction 3000ZA-3X

Introduction 3000ZA-3X

∙Three Zirconium oxide sensors to provide higher range of analysis flexibility. The analyzer can cover ranges as low as 0-10 ppm or as high as 0-95%.

∙No reference gas required

∙Versatile analysis over a wide range of applications.

∙Microprocessor based electronics: 8-bit CMOS microprocessor with 32 kB RAM and 128 kB ROM.

∙Three user definable output ranges (from 0-1 ppm through 0-95%) allow best match to users process and equipment.

∙Auto ranging allows analyzer to automatically select the proper preset range for a given measurement. Manual override allows the user to lock onto a specific range of interest.

∙Two adjustable concentration alarms and a system failure alarm.

∙Extensive self-diagnostic testing, at startup and on demand, with continuous power-supply monitoring.

∙CE compliance

∙RS-232 serial digital port for use with a computer or other digital communication device.

∙Four analog outputs: two for measurement (0–1 VDC and isolated 4–20 mA DC) and two for range identification.

∙Convenient and versatile, steel, flush-panel or rack- mountable case with slide-out electronics drawer.

1.4Model Designations

3000ZA: Standard model for sample under pressure

3000ZA-C:In addition to all the standard features, this model also has separate ports for zero and span gases, and built-in control valves. The internal valves are entirely under the control of the 3000ZA electronics to automatically

Teledyne Analytical Instruments 2