Teledyne 3000ZA operating instructions Operation, Maintenance

Trace Oxygen Analyzer

Operation		28
4.1	Introduction	28
4.2	Using the Data Entry and Function Buttons	29
4.3	The System Function	31
	4.3.1 Tracking the Oxygen Readings during Calibration	32
	4.3.2 Setting up an Auto-Cal	33
	4.3.3 Password Protection	34
	4.3.3.1 Entering the Password	34
	4.3.3.2 Installing or Changing the Password	35
	4.3.4 Logout	37
	4.3.5 System Self-Diagnostic Test	37
	4.3.6 Version Screen	38
	4.3.7 Showing Negative Oxygen Readings	38
4.4	The Zero and Span Functions	39
	4.4.1 Zero Cal	40
	4.4.1.1 Auto Mode Zeroing	40
	4.4.1.2 Manual Mode Zeroing	41
	4.4.1.3 Cell Failure	41
	4.4.2 Span Cal	42
	4.4.2.1 Auto Mode Spanning	42
	4.4.2.2 Manual Mode Spanning	43
	4.4.3 Span Failure	44
4.5	The Alarms Function	45
4.6	The Range Function	47
	4.6.1 Setting the Analog Output Ranges	47
	4.6.2 Fixed Range Analysis	48
4.7	The Analyze Function	49
4.8	Signal Output	49
Maintenance		52
5.1	Routine Maintenance	52
5.2	Cell Replacement	52
	5.2.1 Removing the Sensor	52
	Teledyne Analytical Instruments	ix