Teledyne 3000ZA operating instructions Pswd Restrictions Removed

Trace Oxygen Analyzer Operation

The screen prompts you to enter the current password. If you are not using password protection, press Enter to accept TETAI as the default password. If a password has been previously installed, enter the password using the __ arrow keys to scroll back and forth between letters, and the __ arrow keys to change the letters to the proper password. Press Enter to enter the password.

If the password is accepted, the screen will indicate that the password restrictions have been removed and you have clearance to proceed.

PSWD Restrictions

Removed

In a few seconds, you will be given the opportunity to change this password or keep it and go on.

Change Password? <ENT>=Yes <ESC>=No

Press Escape to move on, or proceed as in Changing the Password, below.

4.3.3.2INSTALLING OR CHANGING THE PASSWORD

If you want to install a password, or change an existing password, proceed as above in Entering the Password. When you are given the opportunity to change the password:

Change Password? <ENT>=Yes <ESC>=No

Press Enter to change the password (either the default TETAI or the previously assigned password), or press Escape to keep the existing password and move on.

If you chose Enter to change the password, the password assignment screen appears.

T E T A I <ENT> To Proceed

—or—

A A A A A

<ENT> To Proceed

Teledyne Analytical Instruments 35