Omron HBP-1300 specifications Align the artery mark Index Artery with the brachial artery

Page 22

Applying the Cuff to the Patient

1. Wrap on a bare arm or over thin clothing.

Wrap the cuff on a bare arm or over thin clothing. Thick clothing or a rolled up sleeve will cause inaccurate blood pressure measurements.

The device can be used on either the right or left arm.

2. Align the artery mark "INDEXARTERY" with the brachial artery.

Run the cuff tube out the peripheral side with no bends (the brachial artery is on the inner side of the patient's upper arm).

Make sure that "INDEXARTERY" is within the "RANGE" and the lower edge of the cuff is 1/2 -1 inches from the inner side of the elbow joint.

If "INDEXARTERY" is outside the "RANGE", error in the blood pressure value will increase. In this case, use a different cuff size.

As a guideline for the tightness of the cuff, It should be possible to insert about two fingers under the cuff.

1.

2.

3.

1/2"-1"

3.During measurement, keep the brachial artery on which the cuff is wrapped at the same height as the right atrium of the heart.

20

Image 22
Contents HBP-1300 Page Intended Use IntroductionExemptions General Information Setup Usage warnings and cautionsBefore use / during use Page Cleaning Maintenance and inspectionOptional rechargeable battery Non-Invasive Blood Pressure Nibp measurement For cleaning, see Main unit Standard accessories Using the UnitOptional Accessories Components of the ProductCuff Hose 3.5 m Features of the ProductKey features, benefits, look Cuff Hose 1.5mMeaning of the Symbols Features / Functions of UnitFront and back of unit Only when the optional battery is installed Using the UnitLCD Display Low battery Installing the Optional Battery PackBattery life Auto Power OffBattery level Connecting the AC AdapterBattery charging AC powerPress the Mode button System SettingsMenu Mode Press the or button to change the settingCheck the Pressure Accuracy Utility ModePress the or button to change the auto power off setting ExampleNon-Invasive Blood Pressure Nibp Measurement Non-Invasive Pressure Measurement PrinciplesCuff Selection and Connection Connecting the cuffAvailable as an optional accessory Selecting the cuffAlign the artery mark Index Artery with the brachial artery Blood pressure measurement is performed once Measurement results are displayedFailure Body movement detection function Taking the Measurement in Auscultation ModeIrregular pulse wave detection function Use a stethoscope to perform measurementDisplaying Last Reading Stopping the MeasurementIrregular pulse wave icon Appears Device Maintenance MaintenanceMaintenance Inspection and Safety Management Accessory CareAfter turning on the power Before turning on the powerWhen turning on the power Check before UseTroubleshooting Abnormal measurement value StethoscopeMeasurement value is questionable List of Error Codes Error Priority Description Points to checkDisposal Other problemsError Priority Cause Solution Code DescriptionLimited Warranty Call toll freeSpecifications SpecificationsFactory Default Settings BackupEnvironmental Conditions Power supplyNon-Invasive Blood Pressure Nibp Electromagnetic Immunity IEC60601-1-2 Manufacturers DeclarationEmission Test Compliance Electromagnetic Environment IEC60601-1-2 Electromagnetic Test level Recommend separation distancePage Recommended Separation Distances Separation distance according to frequency of transmitterPage Distributed by For Customer Service Call Toll FreeWest Field Court, Lake Forest, IL 60045, USA Made in China
Related manuals
Manual 38 pages 5.6 Kb