Graco 248873, 248871, 249012 Fire and Explosion Hazard, Carbon Monoxide Hazard, Injection Hazard

Page 3

Warnings

Warnings

The following are general warnings related to the safe setup, use, grounding, maintenance and repair of this equip- ment. In the text of this manual, the exclamation point symbol alerts you to a warning and the hazard symbol refers to specific risks. Refer back to these General Warnings pages. Additional procedure-specific warnings will be included where applicable.

Warnings

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

•Use equipment only in well ventilated area.

•Do not fill fuel tank while engine is running or hot; shut off engine and let it cool. Fuel is flammable and can ignite or explode if spilled on hot surface.

•Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).

•Keep work area free of debris, including solvent, rags and gasoline.

•Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes are present.

•Ground equipment and conductive objects in work area. See Grounding instructions.

•Use only grounded hoses.

•Hold gun firmly to side of grounded pail when triggering into pail.

•If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

•Keep a fire extinguisher in work area.

CARBON MONOXIDE HAZARD

Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Breathing carbon monoxide can cause death. Do not operate in an enclosed area.

INJECTION HAZARD

High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

•Do not point gun at anyone or at any part of the body.

•Do not put your hand over the spray tip.

•Do not stop or deflect leaks with your hand, body, glove, or rag.

•Do not spray without tip guard and trigger guard installed.

•Engage trigger lock when not spraying.

•Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking, or servicing equipment.

PRESSURIZED EQUIPMENT HAZARD

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and cause serious injury.

•Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking, or servicing equipment.

•Tighten all fluid connections before operating the equipment.

•Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.

PRESSURIZED ALUMINUM PARTS HAZARD

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical reaction and equipment rupture, and result in death, serious injury, and property damage.

311018C

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Important Safety Instructions De alta pressão LineLazer IV 200HSGraco Inc. P.O. Box 1441 Minneapolis, MN Contents Table des matièresÍndice Pressurized Equipment Hazard Fire and Explosion HazardCarbon Monoxide Hazard Injection HazardPersonal Protective Equipment Equipment Misuse HazardBurn Hazard Moving Parts HazardMises en garde Risque D’INJECTIONRisques DUS AUX Pièces EN Aluminium Sous Pression Équipement DE Protection Individuel Risques DE BrûlureAdvertencias Equipo DE Protección Personal Peligros Debidos a LA Utilización Incorrecta DEL EquipoPeligro DE Quemaduras Peligro DE Piezas EN MovimientoAdvertências Equipamento DE Protecção Pessoal Perigos DE MÁ Utilização do EquipamentoPerigo DE Queimaduras Perigo Resultante DE Peças EM MovimentoLL5213 LL5215 LL5217 LL5219 English Français Español Português Setup / Installation / Puesta en marcha / Instalação Safe Range cold Cuidado PrecauciónStartup / Démarrage Puesta en marcha / Colocação em serviço En marcha el motor Métallique mis à la terre Décompression Paint FlushBoth guns simultaneously Uma linha com largura de até No fluid spray No spray icon Ti3355a Ti3347a Film build over the last 20 ft Relâcher le bouton DTS Ti6441a Ti6442a Ti6443a Ti6444a Serial NUM NUM Unknown distances Pulse y mantenga pulsado OFF Miles or Kilometers Display. Engine Hours Miles ou Kilometres Engine Hours défileOu Kilometers Roll 25ft or 10 m Aparece Software REV Software REV scrollsArrêter la pompe Software REV défileAlternar entre indicações Change Display UnitsChangement des unités affi Chées Cambiar las unidades De la visualizaciónOFF Efectue a Descompressão Perform Pressure ReliefRealice el Procedimiento de Descompresión, páginaMotor begins to drive Off Attach loosely onto 311018C For Graco Canada Customers Warranty / Garantie / Garantía / GarantiaGraco Headquarters Minneapolis

249013, 248871, 248872, 249012, 248873 specifications

Graco is a well-known brand in the field of paint sprayers and related equipment, offering a range of products designed to improve efficiency and quality in painting tasks. Among their lineup, the Graco 248870, 248873, 249012, 248872, and 248871 models stand out due to their advanced features and technologies designed for both professional contractors and DIY enthusiasts.

The Graco 248870 is highly regarded for its reliability and ease of use. It features a robust design that ensures durability even under continuous use. This model is equipped with an adjustable pressure control system, allowing users to fine-tune the pressure to suit various materials and applications, ensuring a smooth finish every time.

Meanwhile, the Graco 248873 model boasts enhanced portability due to its lightweight design and compact size. It features a flexible suction system that enables users to spray directly from a 1-gallon container or a 5-gallon bucket. This versatility is ideal for larger projects, providing the option to work without frequent refills.

The Graco 249012 is specifically engineered for professionals who demand precision and efficiency. With its HEA (High Efficiency Airless) technology, this sprayer reduces overspray while delivering a fine finish. It is designed to handle a wider range of coatings, making it suitable for everything from thin stains to thicker paints.

Graco 248872 is particularly notable for its easy cleaning and maintenance features. This model includes a built-in cleaning adapter that makes flushing the system quick and hassle-free. Additionally, its SmartControl technology ensures consistent spray patterns regardless of pressure changes, enhancing the overall user experience.

Finally, the Graco 248871 serves as an excellent choice for smaller projects. It combines powerful performance with a user-friendly interface, making it suitable for home users and professionals alike. This model can spray various materials, and its compact design makes it easy to store and transport.

In summary, Graco's range of models 248870, 248873, 249012, 248872, and 248871 offers something for everyone, with features tailored for efficiency, precision, and ease of use. Whether for professional applications or home improvement projects, these sprayers guarantee quality results and reliability.
Top Page Image Contents