A&D UA_851THX What Display Symbols Mean, Display Condition/Cause Recommended Symbol Action

What Display Symbols Mean

Display/		Condition/Cause	Recommended
Symbol			Action
		The symbol shown while measurement	Measurement is in progress,
		is in progress. It blinks while detecting	remain as still as possible.
		the pulse.
		An irregular heartbeat or body	Take measurement again and
		movement may have occurred. Refer	consult with your physician.
		to page E-9 for more information on
		irregular heartbeats.
		The battery power indicator is	Replace all batteries with new
		displayed during measurement.
			ones when the symbol blinks.
	Battery Full
			Alkaline batteries recommended.

	The batteries are low when it blinks.
Battery Low
	Unstable blood pressure due to	Try the measurement again.
	excessive body movement.	Remain very still during the
		measurement.
	The systolic and diastolic values are	Fasten the cuff correctly, and try
	within 10 mmHg of each other.	the measurement again.
	The pressure value did not increase	Check for air leaks along the tube
	during inflation.	and around the air socket.
	The cuff is not fastened correctly.	Refasten the cuff and retake
		measurement.
	There is an air leak in the cuff or	Make sure tube is properly
	monitor.	connected to cuff and monitor.
	The pulse was not detected correctly.	Try the measurement again.
		Remain very still during the
PULSE DISPLAY ERROR		measurement.
	Cuff Inflation Meter	Measurement is in progress,
		remain as still as possible.
	Pressure Rating Indicator™	Refer to the section “About
		Pressure Rating Indicator” for
		further explanation.

A&D Medical (Toll-Free): 1-888-726-9966 Page E-2