Unit Settings
CAMERA
PELCO EXSITE IPSXM
LANGUAGE | ENGLISH | |||
UNIT INVERSION | OFF | |||
<SYSTEM INFORMATION> |
| |||
<DISPLAY SETUP> |
| |||
<UNIT SETTINGS> |
| |||
<POSITION CALIBRATION> |
| |||
RESET CAMERA |
| |||
CYCLE CAMERA POWER |
| |||
REBOOT SYSTEM |
| |||
EXIT |
| |||
|
|
|
| |
|
|
|
|
|
UNIT SETTINGS |
| |||
|
| |||
|
|
|
|
|
<CAMERA> |
| |||
<MOTION> |
| |||
<POWER UP> |
| |||
<LINE SYNC> |
| |||
<PRESETS> |
| |||
<PATTERNS> |
| |||
<ZONES> |
| |||
<WINDOW BLANKING> |
| |||
<ALARMS> |
| |||
<WIPER> |
| |||
<AUX> |
| |||
<CLEAR> |
| |||
<PASSWORD> |
| |||
BACK |
| |||
EXIT |
| |||
TYPE OF LIGHTING
Pelco has calibrated settings that optimize the white balance, and the picture, for multiple lighting conditions; settings differ depending upon the model.
There are two types of lighting settings for 22X models:
T1 (default) | For use in outdoor applications. |
T2 | For use in indoor applications. |
There are three settings for 23X models:
T1 (default) | For use in outdoor applications. |
T2 | For use in indoor applications. |
T3 | For use in applications that use sodium lighting. |
AUTO FOCUS
Auto focus allows the lens to remain in focus during
There are two auto focus settings:
ON (default) | If auto focus mode is set to ON, the camera will focus |
| automatically when using pan, tilt, and zoom functions. |
Off | Focus is operated manually. To focus, press the Focus Far or Focus |
| Near button on the controller. |
CAMERA |
|
|
|
TYPE OF LIGHTING | T1 |
AUTO FOCUS | ON |
ZOOM LIMIT | X184 |
ZOOM SPEED | MEDIUM |
LOW LIGHT LIMIT | 2 |
IR CUT FILTER* | AUTO |
AUTO IR LEVEL* | DUSK |
<ADVANCED SETTINGS> |
|
ZOOM LIMIT
Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The following are the zoom limit settings for the ExSite Series systems:
23X | Day/Night Camera | Camera zooms optically to 23X and then zooms electronically. 32X, |
|
| 92X,184X, or 230X. Default setting is 184X. |
22X | Color Camera | Camera zooms optically to 22X and then zooms electronically. 22X, |
|
| 32X, 88X, 176X, 220X, or 264X. The default setting is 176X. |
BACK
EXIT
* Available only with the 23X day/night camera.
ZOOM SPEED
Zoom speed allows the user to define how fast the dome will go from full wide zoom to the 23X optical zoom. The default setting is MEDIUM.
Available settings for zoom speed include the following:
| 22X COLOR | 23X DAY/NIGHT |
HIGH | 2.4 seconds | 2.9 seconds |
MEDIUM (default) | 3.9 seconds | 4.2 seconds |
LOW | 6.3 seconds | 5.8 seconds |
NOTE: When using the HIGH setting, the image may be out of focus until zooming stops.
LOW LIGHT LIMIT
Low light limit is the maximum duration, in fractions of a second, that the electronic shutter will remain open in low light conditions. The default setting is 2.
Settings include the following:
2 = 1/2 second | 8 = 1/8 second | 30 = 1/30 second |
4 = 1/4 second | 15 = 1/15 second | 60 = 1/60 second |
16 |
|