PELCO EXSITE IPSXM
LANGUAGE | ENGLISH | ||
UNIT INVERSION | OFF | ||
<SYSTEM INFORMATION> |
| ||
<DISPLAY SETUP> |
| ||
<UNIT SETTINGS> |
| ||
<POSITION CALIBRATION> |
| ||
RESET CAMERA |
| ||
CYCLE CAMERA POWER |
| ||
REBOOT SYSTEM |
| ||
EXIT |
| ||
|
|
|
|
IR CUT FILTER (23X DAY/NIGHT CAMERA)
ExSite IPSXM has two modes of operation: color and
The following are the settings for the IR cut filter:
OFF | Manual operation is controlled by preset 88 (filter IN) and 89 (filter OUT). |
AUTO (default) | Automatic operation is controlled by the Auto IR Level setting. |
UNIT SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS> <WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
CAMERA |
|
TYPE OF LIGHTING | T1 |
AUTO FOCUS | ON |
ZOOM LIMIT | X184 |
ZOOM SPEED | MEDIUM |
LOW LIGHT LIMIT | 2 |
IR CUT FILTER* | AUTO |
AUTO IR LEVEL* | DUSK |
<ADVANCED SETTINGS> |
|
BACK |
|
EXIT |
|
* Available only with the 23X day/night camera.
Auto IR Level
The auto IR level is the light level at which the infrared filter switches IN or OUT.
Following are the available settings for the Auto IR Level:
DUSK (default) | approximately 6 lux (black - white) |
| approximately 13 lux (color) |
DARK | approximately 0.1 lux (black - white) |
| approximately 2 lux (color) |
NOTES:
•If backlight compensation is ON and the IR cut filter switches OUT in normal lighting conditions, adjust the Auto IR Level to a darker setting. Refer to the Backlight Compensation section.
•Low light does not mean no light. Some type of illumination is required (street light, IR light, etc.). The camera is not sensitive to IR light when the IR cut filter is IN.
Quick Programming Guide
(See Page 9)
17 |