PELCO EXSITE IPSXM
LANGUAGE | ENGLISH | |||
UNIT INVERSION | OFF | |||
<SYSTEM INFORMATION> |
| |||
<DISPLAY SETUP> |
| |||
<UNIT SETTINGS> |
| |||
<POSITION CALIBRATION> |
| |||
RESET CAMERA |
| |||
CYCLE CAMERA POWER |
| |||
REBOOT SYSTEM |
| |||
EXIT |
| |||
|
|
|
| |
|
|
|
|
|
UNIT SETTINGS |
| |||
|
| |||
|
|
|
|
|
<CAMERA> |
| |||
<MOTION> |
| |||
<POWER UP> |
| |||
<LINE SYNC> |
| |||
<PRESETS> |
| |||
<PATTERNS> |
| |||
<ZONES> |
| |||
<WINDOW BLANKING> |
| |||
<ALARMS> |
| |||
<WIPER> |
| |||
<AUX> |
| |||
<CLEAR> |
| |||
<PASSWORD> |
| |||
BACK |
| |||
EXIT |
| |||
|
|
|
|
|
|
|
|
|
|
AUTO IRIS
Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions.
Program the auto iris to operate automatically or at a
OFF | Auto iris is disabled, and control is always manual. |
AUTO (default) | The iris is adjusted automatically to produce a constant video output as deter- |
| mined by the Auto Iris Level setting. |
If auto iris is in the auto mode, it will remain that way until the iris is manually opened or closed. The system will return to auto mode when it is panned or tilted more than 15 degrees.
Auto Iris Level
Auto iris level is the numeric value the auto iris uses to maintain the brightness level of the camera. Increase the value to brighten the scene. Decrease the level to darken the scene. This setting can be adjusted if the video level in the auto iris mode is too bright or too dark.
If backlight compensation is ON, decrease the Auto Iris Level setting.
Auto Iris Peak
Increasing the peak value will cause the auto iris circuit to react more to highlights or “peaks” in the picture. Decreasing this value will cause it to use the average video level to adjust the iris.
CAMERA |
|
| |||
TYPE OF LIGHTING | T1 | ||||
AUTO FOCUS | ON | ||||
ZOOM LIMIT | X184 | ||||
ZOOM SPEED | MEDIUM | ||||
LOW LIGHT LIMIT | 2 |
| |||
IR CUT FILTER* | AUTO | ||||
AUTO IR LEVEL* | DUSK | ||||
|
|
|
|
|
|
<ADVANCED SETTINGS> |
|
| |||
BACK |
|
| |||
EXIT |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
AUTO SHARPNESS
Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture.
There are two settings:
ON (default) | The camera automatically maintains a normal sharpness mode. |
OFF | The sharpness of the picture is set manually by programming the sharpness |
| level. Sharpness level settings range from |
ADVANCED SETTINGS
SHUTTER SPEED | AUTO |
AGC LIMIT | 28 |
|
|
AUTO IRIS | AUTO |
AUTO IRIS LEVEL | 91 |
AUTO IRIS PEAK | 16 |
AUTO SHARPNESS | ON |
SHARPNESS LEVEL | 26 |
AUTO WHITE BALANCE | ON |
R GAIN | 146 |
B GAIN | 294 |
BACKLIGHT COMP | OFF |
VIDEO LEVEL | HIGH |
WIDE DYNAMIC RANGE* | OFF |
BACK |
|
EXIT |
|
* Available only with the 23X day/night camera.
AUTO WHITE BALANCE
This feature automatically processes the viewed image to retain color balance over a color temperature range. The default setting for auto white balance is ON.
R GAIN | Adjusts the picture output in the red range. As you change the value, you will |
| see the color change on your monitor. |
B GAIN | Adjusts the picture output in the blue range. As you change the value, you will |
| see the color change on your monitor. |
Quick Programming Guide
(See Page 9)
19 |