PELCO EXSITE IPSXM
LANGUAGE | ENGLISH | |||
UNIT INVERSION | OFF | |||
<SYSTEM INFORMATION> |
| |||
<DISPLAY SETUP> |
| |||
<UNIT SETTINGS> |
| |||
<POSITION CALIBRATION> |
| |||
RESET CAMERA |
| |||
CYCLE CAMERA POWER |
| |||
REBOOT SYSTEM |
| |||
EXIT |
| |||
|
|
|
| |
|
|
|
|
|
UNIT SETTINGS |
| |||
|
| |||
<CAMERA> |
| |||
<MOTION> |
| |||
<POWER UP> |
| |||
<LINE SYNC> |
| |||
<PRESETS> |
| |||
<PATTERNS> |
| |||
<ZONES> |
| |||
<WINDOW BLANKING> |
| |||
<ALARMS> |
| |||
<WIPER> |
| |||
<AUX> |
| |||
<CLEAR> |
| |||
<PASSWORD> |
| |||
BACK |
| |||
EXIT |
| |||
|
| |||
|
|
|
|
|
MOTION |
| |||
|
| |||
PROPORTIONAL PAN | ON | |||
PARK TIME (MINUTES) | 0 | |||
PARK ACTION | NONE | |||
SCAN SPEED (DEG/S) | 25 | |||
PRESET FREEZE FRAME | AUTO | |||
LIMIT STOPS | ON | |||
<SET MANUAL STOPS> |
| |||
<CLEAR MANUAL STOPS> |
| |||
<SET SCAN STOPS> |
| |||
<CLEAR SCAN STOPS> |
| |||
<SET AZIMUTH ZERO> |
| |||
<CLEAR AZIMUTH ZERO> |
| |||
BACK |
| |||
EXIT |
| |||
REFERENCE INFORMATION |
| |||
MANUAL LIMITS SET | NO | |||
SCAN LIMITS SET | NO | |||
SCAN SPEED
Scan speed is the degrees per second that the system will pan when in scan mode. Scan speed is adjustable from 1 to 40 degrees per second through the programming menu. The default setting is 25 degrees per second.
PRESET FREEZE FRAME
This feature freezes the scene on the monitor when going to a preset. This allows for smooth transition from one preset scene to another. Preset freeze frame also reduces bandwidth when used with digital network systems such as PelcoNet™ and guarantees that blanked areas will not be revealed when going to a preset.
There are three preset freeze frame settings:
ON | The image on the screen freezes when a preset is called. When the system |
| reaches the preset, the image is unfrozen and the preset scene is displayed. |
OFF | The image is never frozen. |
AUTO (default) | Freeze frame is turned on automatically if window blanking is ON. If window |
| blanking is OFF, freeze frame is off. |
Quick Programming Guide
(See Page 9)
23 |