9
GETTING STARTED WITH yOUR WATER FLOSSER
Plug the cord into an electrical outlet. If the outlet is controlled by a wall switch, be sure it is turned on.
Preparing the Reservoir
Lift the reservoir lid, remove the reservoir, and fill with lukewarm water. Replace the reservoir over the base and press down firmly and close the lid.
Remove
Fill
Inserting and Removing Tips
Insert tip into the center of the Water Flosser handle, pressing down firmly until tip clicks into place. The colored ring will be flush with the top of the handle if the tip is correctly locked into place. Gently pull on tip to confirm it is seated properly and locked in place.
To remove tip from the handle push the tip eject button on the handle. The control knob will rise, releasing the tip. Remove the tip.
Caution: Do not press tip eject button while unit is running.
Tip Insertion
Insert
NO
Gap
Tip Removal
Replace
Eject
Tip
Eject
Button
ENGLISH