OPERATION INSTRUCTIONS
Set the date using the up and down keys cd and enter the values on the keypad.
02About
This screen displays the software version of the scale.
06SYSTEM TEST
01Battery Test
The scale will display the estimated amount of battery life remaining until the batteries will have to be replaced.
NOTE: In order to complete the battery test, the scale must be powered by batteries only. Unplug the scale from AC power source prior to battery test.
02USB Connection
The scale will test the connection to the PC and will display a message “Connection is OK” or ”NO Connection”.
If “NO Connection” is displayed, check your USB connections on the scale and on your PC and retest the connection. Refer to qualified service personnel if problem persists.
16