SHAVING TIPS
Keep the unit clean and dry at all times.
Wash and dry your skin thoroughly prior to shaving.
In order to achieve the closest shave and avoid unnecessary wear on the foils, be sure that both foils contact the skin simultaneously. Do not hold the shaver at an angle where only one foil contacts the skin – this will cause distortion of the foil and may result in skin irritation.
Stretch your skin with your free hand while using short, circular strokes. This will make the hairs stand out from your face and allow the cutting heads to reach them more easily. Shave against the grain for optimum results.
To facilitate cutting and avoid foil wear, do not apply the shaver to your skin with high pressure.
The normal replacement period for the foil screens is about 6 months.
In order to maintain shaving performance and comfort, replace the cutters at least once a year. To order replacement parts, please refer to the “Ordering Replacement Parts” section of this manual.
Using this Shaver
1.Remove the protective plastic headguard. (Fig. 1)
2.Ensure that the foil screens and inner cutters are not damaged.
Replace damaged parts before using. To obtain replacement parts, refer to the “Ordering Replacement Parts” section of this manual.
3. To turn the shaver on, depress | 1 2 | |
the lock button and slide the on/off | ||
| ||
switch up to the “on” position. (fig. 2) |
|
AXIS NITRIS AND AXIS FUEL 12 ENGLISH | AXIS NITRIS AND AXIS FUEL 13 ENGLISH |