While the shaver is recharging, a small continuous noise may be heard or the shaver body or the AC adaptor may build up and emit some heat. This is not a malfunction.
After recharging
>After the shaver is recharged for approximately 1 hour, all the power reserve indicator LEDs and the recharge indicator LED will remain lit up, indicating that the shaver is fully charged.
>After recharging, be sure to pull out the power cord plug of the AC adaptor from the outlet.
* When unplugging the AC adaptor, do not pull the power cord,
as this may cause a malfunction. Be sure to hold the plug when pulling it out.
USING YOUR SHAVER
WITH THE AC POWER SUPPLY
Checking to see that the power switch is off, insert the power cord of the AC adaptor securely into the socket at the bottom of the shaver, and then, insert the outlet plug into the outlet. Then, slide the power switch on.
>With the shaver connected to the AC adapter, should the shaver not operate by sliding the power switch on, the rechargeable battery is completely depleted. In this case, slide the power switch off, allow the shaver to charge for 1 minute, and then slide the power switch back on again.
>After each use, make sure to slide the power switch off, and then unplug the AC adapter from the outlet and from the shavers recharging socket.
>If your environment is humid, such as a bathroom, do not use the shaver with its AC power supply.
AXIS AIR 18 ENGLISH | AXIS AIR 19 ENGLISH |