Philips M3860A, M3861A manual Using Setup Features

P hili ps Me dical Sy stems

			6-5
parameter	settings	default	description
resume key	ON, OFF	OFF	Enables (ON) or disables (OFF) user-initiated interruption
			of the CPR pause and return to analyzing. If either the
			CPR Timer or the NSA Action setting is programmed to
			1.5 minutes or longer, the Resume Key setting is
			automatically enabled (ON).
			If enabled, the Resume
			Key is accessed by
			pressing the lower Option
			button indicated by an
			arrow on the FR2+
			display, as shown in the
			sample screen:

advanced use	0.5, 1.0, 1.5,	0.5	Sets the interval for “Press to Analyze” prompts provided
prompt	2.0, 2.5, 3.0		during advanced mode operation.
interval
(minutes)

Using Setup Features

N O T E : To move around the menus displayed, use the Option buttons as follows:

• Press the LOWER Option button to move the highlight bar from one item to another on the menu.

• Press the UPPER Option button to select the highlighted item or to

scroll through the settings for that item.	6
The FR2+ comes with a factory default setup designed to meet the needs of
most users. The setup feature of the FR2+ lets you review the current setup
of your HeartStart FR2+ or install a revised setup if appropriate. To go to the
SETUP menu:

1.Remove and reinstall the battery to bring up the first menu on the screen.

N O T E : This screen will not be displayed if the FR2+ is connected to defibrillator pads (that are applied to the patient) when the battery is inserted, and you will not be able to access the menu items. In addition, the battery insertion selftest and periodic automatic selftests cannot run while the defibrillator pads are connected. Be sure to unplug the pads connector from the FR2+ after each use. Do not store the FR2+ with the pads connected.

Setup and Advanced Mode Features