Lifescan Blood Glucose Monitor System manual Insert Test Strip

Page 22

How to do a control solution test:

Note: You cannot perform a control solution test until you have set up the meter completely (see pages 6-9).

STEP 1

Insert Test Strip.

Insert a test strip, contact bars end first and facing up, into the test port. (Contact bars must be inserted all the way into the meter or you may get an inaccurate test result.) The meter will turn on automati- cally. All segments will appear briefly on the display followed by the date and time. Then “code 12” (example) is followed by

the symbol. Be sure the code number on the display matches the code number on the test strip vial. If the code numbers do not match, code the meter correctly.

When the symbol appears on the dis- play, press and hold the C button until “ctl” appears. With the “ctl” sign on the display, the meter will mark your next test in memory as a control solution test.

12

Image 22

Contents

Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port PocketScan Test Strips Target AreaImportant Test Strip Information Checking the Display Coding the MeterEnter the Code Mode Match the Code NumbersCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Apply Control Solution Result Appears in 15 SecondsComparing control solution results At UK 0800 Republic of Ireland 1800Testing Your Blood Insert a Lancet in the Penlet II Automatic Blood Sampler Getting a Drop of BloodCock the Penlet II Sampler Lance Your Finger Wash Your HandsRemove the Lancet Step-by-Step Test Procedure Apply Sample Accurate Results in Just 15 SecondsSpecial Messages ExampleUsing the Meter Memory Recall Test Results Exit the Memory Mode Data DownloadingResults References Maintenance BatteriesSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Automatic Shutoff Two minutes after last user action Test Time 15 secondsCalibration Plasma/Serum Operating RangesSet the Year Changing the DateSet the Day Set the Month Set the Hour Changing the TimeSet the Minutes Exit the Setting Mode Select mmol/L or mg/dLPage Test Page 1998 Visit the LifeScan website at