Lifescan Blood Glucose Monitor System manual That Blood Sample was

Page 43

MESSAGE

WHAT IT MEANS

ACTION

Error message that indicates that there is a problem with the meter.

Review the instructions and try again with a new test strip. If the problem persists, call LifeScan Customer Care FreePhone, UK: 0800 121200, Republic of Ireland: 1800 535676, for help.

Error message could be caused by a used test strip or indicates a temporary or permanent electronics problem.

Repeat the test with a new test strip. If the error message appears again, contact LifeScan Customer Care FreePhone at UK: 0800 121200, Republic of Ireland: 1800 535676.

Error	message	that indicates	Repeat the test with a new test
that	the blood	sample was	strip. Apply blood sample only
applied before		appeared	when	appears on the dis-
on the display.			play.

33

Image 43

Contents Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port Target Area PocketScan Test StripsImportant Test Strip Information Coding the Meter Checking the DisplayMatch the Code Numbers Enter the Code ModeCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Result Appears in 15 Seconds Apply Control SolutionAt UK 0800 Republic of Ireland 1800 Comparing control solution resultsTesting Your Blood Insert a Lancet in the Penlet II Automatic Blood Sampler Getting a Drop of BloodCock the Penlet II Sampler Lance Your Finger Wash Your HandsRemove the Lancet Step-by-Step Test Procedure Accurate Results in Just 15 Seconds Apply SampleExample Special MessagesUsing the Meter Memory Recall Test Results Data Downloading Exit the Memory ModeResults References Batteries MaintenanceSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Operating Ranges Test Time 15 secondsCalibration Plasma/Serum Automatic Shutoff Two minutes after last user actionSet the Year Changing the DateSet the Day Set the Month Set the Hour Changing the TimeSet the Minutes Select mmol/L or mg/dL Exit the Setting ModePage Test Page 1998 Visit the LifeScan website at