Lifescan Blood Glucose Monitor System manual Data Downloading, Exit the Memory Mode

Page 33

Note: When using the meter for the first time, “mem---” will appear, showing that there are no test results in memory.

STEP 3

Exit the Memory Mode.

Press the M button to turn off the meter.

(Example)

Data Downloading

Using a PocketScan™ Adapter, you can easily transfer your test results to a LifeScan Interface Cable connected to a serial port on your personal computer. The test result data can then be viewed using any PocketScan™ Meter-compatible software. To obtain information on the PocketScan Adapter, call the LifeScan Customer Care Freephone 0800 121200 for further details.

A D A P T E R

23

Image 33

Contents Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port Target Area PocketScan Test StripsImportant Test Strip Information Coding the Meter Checking the DisplayMatch the Code Numbers Enter the Code ModeCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Result Appears in 15 Seconds Apply Control SolutionAt UK 0800 Republic of Ireland 1800 Comparing control solution resultsTesting Your Blood Getting a Drop of Blood Insert a Lancet in the Penlet II Automatic Blood SamplerCock the Penlet II Sampler Wash Your Hands Lance Your FingerRemove the Lancet Step-by-Step Test Procedure Accurate Results in Just 15 Seconds Apply SampleExample Special MessagesUsing the Meter Memory Recall Test Results Data Downloading Exit the Memory ModeResults References Batteries MaintenanceSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Calibration Plasma/Serum Test Time 15 secondsAutomatic Shutoff Two minutes after last user action Operating RangesChanging the Date Set the YearSet the Day Set the Month Changing the Time Set the HourSet the Minutes Select mmol/L or mg/dL Exit the Setting ModePage Test Page 1998 Visit the LifeScan website at