Lifescan Blood Glucose Monitor System manual Select mmol/L or mg/dL, Exit the Setting Mode

Page 51

Changing the Unit of Measurement

The PocketScan™ Meter can display test results in millimoles per liter (mmol/L) or in milligrams per deciliter (mg/dL). Before setting the unit of measurement, you must first set the date and time.

STEP 1

Select mmol/L or mg/dL.

Press the C button until the unit of mea- surement you are choosing appears on the display.

STEP 2

Exit the Setting Mode.

After choosing your unit of measurement, press the M button to turn off the meter. The meter will display all test results in this unit of measurement.

Note: You must move through the year, day, month, hour, minutes, and unit of measurement to turn off the meter and exit the setting mode. The unit of measurement must be set in order to get a test result.

41

Image 51

Contents Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port Target Area PocketScan Test StripsImportant Test Strip Information Coding the Meter Checking the DisplayMatch the Code Numbers Enter the Code ModeCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Result Appears in 15 Seconds Apply Control SolutionAt UK 0800 Republic of Ireland 1800 Comparing control solution resultsTesting Your Blood Getting a Drop of Blood Insert a Lancet in the Penlet II Automatic Blood SamplerCock the Penlet II Sampler Wash Your Hands Lance Your FingerRemove the Lancet Step-by-Step Test Procedure Accurate Results in Just 15 Seconds Apply SampleExample Special MessagesUsing the Meter Memory Recall Test Results Data Downloading Exit the Memory ModeResults References Batteries MaintenanceSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Operating Ranges Test Time 15 secondsCalibration Plasma/Serum Automatic Shutoff Two minutes after last user actionChanging the Date Set the YearSet the Day Set the Month Changing the Time Set the HourSet the Minutes Select mmol/L or mg/dL Exit the Setting ModePage Test Page 1998 Visit the LifeScan website at