Lifescan Blood Glucose Monitor System manual Using the Meter Memory

Page 31

Your PocketScan™ Meter stores the 150 most recent blood glucose and control solution test results with date and time in its memory. It also provides you with a 14-day average of your blood glucose test results. You can review the test results in memory with these easy steps:

STEP 1

Enter the Memory Mode.

With the meter turned off, press the M button. The 14-day average will appear, indicating that you are in the memory mode. You can now review the 14-day average and the last 150 tests in the memory. The 14-day average appears first; it is calculated from the blood glucose results obtained during the last 14 days. It also indicates how many blood glucose tests have been performed within this period, e.g., 64n (64 tests in the last 14 days). When using the meter for the first time, “14 DAY AVG ---” will appear, showing that there are no test results in memory.

Note: A hi result will be included in your 14- day average as 33.3 mmol/L (600 mg/dL); a lo result will be included as 1.1 mmol/L (20 mg/dL). Results marked as control solution will not be included in your 14-day average.

USING THE METER MEMORY

(Example)

21

Image 31

Contents Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port Target Area PocketScan Test StripsImportant Test Strip Information Coding the Meter Checking the DisplayMatch the Code Numbers Enter the Code ModeCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Result Appears in 15 Seconds Apply Control SolutionAt UK 0800 Republic of Ireland 1800 Comparing control solution resultsTesting Your Blood Insert a Lancet in the Penlet II Automatic Blood Sampler Getting a Drop of BloodCock the Penlet II Sampler Lance Your Finger Wash Your HandsRemove the Lancet Step-by-Step Test Procedure Accurate Results in Just 15 Seconds Apply SampleExample Special MessagesUsing the Meter Memory Recall Test Results Data Downloading Exit the Memory ModeResults References Batteries MaintenanceSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Operating Ranges Test Time 15 secondsCalibration Plasma/Serum Automatic Shutoff Two minutes after last user actionSet the Year Changing the DateSet the Day Set the Month Set the Hour Changing the TimeSet the Minutes Select mmol/L or mg/dL Exit the Setting ModePage Test Page 1998 Visit the LifeScan website at