Lifescan Blood Glucose Monitor System manual Recall Test Results

Page 32

Note: You can enter the memory mode from the test mode. After com- pleting a blood glucose or control solution test and while the test result is still on the display, press the M button. This will put the meter into the memory mode.

(Example)

STEP 2

Recall Test Results.

After three seconds, the 14-day average will be replaced by the most recent test result with date and time. Press the C but- ton once and the next most recent test result will appear. Each time you press and release the C button, the meter will recall up to your last 150 test results in order. When the memory is full, the oldest result is dropped as the newest is added. To move through the tests in memory more quickly, press and hold the C button. Control solution test results will appear on the display with “ctl mem.”

22

Image 32

Contents Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port PocketScan Test Strips Target AreaImportant Test Strip Information Checking the Display Coding the MeterEnter the Code Mode Match the Code NumbersCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Apply Control Solution Result Appears in 15 SecondsComparing control solution results At UK 0800 Republic of Ireland 1800Testing Your Blood Cock the Penlet II Sampler Getting a Drop of BloodInsert a Lancet in the Penlet II Automatic Blood Sampler Remove the Lancet Wash Your HandsLance Your Finger Step-by-Step Test Procedure Apply Sample Accurate Results in Just 15 SecondsSpecial Messages ExampleUsing the Meter Memory Recall Test Results Exit the Memory Mode Data DownloadingResults References Maintenance BatteriesSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Test Time 15 seconds Calibration Plasma/SerumAutomatic Shutoff Two minutes after last user action Operating RangesSet the Day Changing the DateSet the Year Set the Month Set the Minutes Changing the TimeSet the Hour Exit the Setting Mode Select mmol/L or mg/dLPage Test Page 1998 Visit the LifeScan website at