Lifescan Blood Glucose Monitor System manual Changing the Date, Set the Year, Set the Day

Page 48

CHANGING METER SETTINGS

Changing the Date

To change the date, you must first enter the setting mode. Start with the meter off. Then press and hold the M button for three sec- onds. The meter is now in the setting mode.

STEP 1

Set the Year.

The year setting will appear first. Press and release the C button to advance one year. To move faster, hold the C button down. With the correct year on the display, press the M button and the month and day will appear on the display with the month segment flashing.

STEP 2

Set the Day.

Press and release the C button until the correct day appears. To move faster, hold the C button down. With the correct day on the display, press the M button and the hour and minutes settings will appear with the hour segment flashing.

38

Image 48

Contents

Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port PocketScan Test Strips Target AreaImportant Test Strip Information Checking the Display Coding the MeterEnter the Code Mode Match the Code NumbersCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Apply Control Solution Result Appears in 15 SecondsComparing control solution results At UK 0800 Republic of Ireland 1800Testing Your Blood Getting a Drop of Blood Insert a Lancet in the Penlet II Automatic Blood SamplerCock the Penlet II Sampler Wash Your Hands Lance Your FingerRemove the Lancet Step-by-Step Test Procedure Apply Sample Accurate Results in Just 15 SecondsSpecial Messages ExampleUsing the Meter Memory Recall Test Results Exit the Memory Mode Data DownloadingResults References Maintenance BatteriesSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Test Time 15 seconds Calibration Plasma/SerumAutomatic Shutoff Two minutes after last user action Operating RangesChanging the Date Set the YearSet the Day Set the Month Changing the Time Set the HourSet the Minutes Exit the Setting Mode Select mmol/L or mg/dLPage Test Page 1998 Visit the LifeScan website at