Lifescan Blood Glucose Monitor System manual Message What IT Means Action

Page 42

MESSAGE

WHAT IT MEANS

ACTION

 

 

 

A control solution test result

No action required.

 

 

 

 

 

 

 

 

 

stored in the memory.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is no test result stored in No action required. this place in the memory.

Either the ambient temperature or the meter’s temperature was too low to perform a test.

Repeat the test in a warmer place 15-35°C (59-95°F). Allow 20 minutes for the instru- ment to equilibrate to the new ambient temperature before retesting.

Either the ambient temperature or the meter’s temperature was too high to perform a test.

Repeat the test in a cooler place 15-35°C (59-95°F). Allow 20 minutes for the instru- ment to equilibrate to the new ambient temperature before retesting.

32

Image 42
Contents Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port PocketScan Test Strips Target AreaImportant Test Strip Information Checking the Display Coding the MeterEnter the Code Mode Match the Code NumbersCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Apply Control Solution Result Appears in 15 SecondsComparing control solution results At UK 0800 Republic of Ireland 1800Testing Your Blood Getting a Drop of Blood Insert a Lancet in the Penlet II Automatic Blood SamplerCock the Penlet II Sampler Wash Your Hands Lance Your FingerRemove the Lancet Step-by-Step Test Procedure Apply Sample Accurate Results in Just 15 SecondsSpecial Messages ExampleUsing the Meter Memory Recall Test Results Exit the Memory Mode Data DownloadingResults References Maintenance BatteriesSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Automatic Shutoff Two minutes after last user action Test Time 15 secondsCalibration Plasma/Serum Operating RangesChanging the Date Set the YearSet the Day Set the Month Changing the Time Set the HourSet the Minutes Exit the Setting Mode Select mmol/L or mg/dLPage Test Page 1998 Visit the LifeScan website at