Lifescan Blood Glucose Monitor System manual Message What IT Means

Page 39

MESSAGE

WHAT IT MEANS

ACTION

System check. Appears upon insertion of a test strip or whenever the meter is turned on. Verifies that all segments are present on the display.

If segments are missing, contact LifeScan Customer Care FreePhone, UK: 0800 12100, Republic of Ireland: 1800 535676, for further action. Missing seg- ments can lead to the wrong interpreta- tion of the displayed test result.

This message appears immedi- ately after the system check if your meter has not been coded.

See “Coding the Meter,” pages 10-12.

This is the code number stored in the meter.

Make sure that this code num- ber matches the code number on the vial of the test strips you are using.

The system is ready to accept a blood sample.

You may now apply the blood sample.

29

Image 39

Contents Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port Target Area PocketScan Test StripsImportant Test Strip Information Coding the Meter Checking the DisplayMatch the Code Numbers Enter the Code ModeCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Result Appears in 15 Seconds Apply Control SolutionAt UK 0800 Republic of Ireland 1800 Comparing control solution resultsTesting Your Blood Getting a Drop of Blood Insert a Lancet in the Penlet II Automatic Blood SamplerCock the Penlet II Sampler Wash Your Hands Lance Your FingerRemove the Lancet Step-by-Step Test Procedure Accurate Results in Just 15 Seconds Apply SampleExample Special MessagesUsing the Meter Memory Recall Test Results Data Downloading Exit the Memory ModeResults References Batteries MaintenanceSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Operating Ranges Test Time 15 secondsCalibration Plasma/Serum Automatic Shutoff Two minutes after last user actionChanging the Date Set the YearSet the Day Set the Month Changing the Time Set the HourSet the Minutes Select mmol/L or mg/dL Exit the Setting ModePage Test Page 1998 Visit the LifeScan website at