Lifescan Blood Glucose Monitor System manual Tests were performed within This period

Page 44

MESSAGE

WHAT IT MEANS

ACTION

Error message that indicates that there may be a problem with the test strip, e.g., the test strip may have been damaged, removed during testing, or inserted improperly.

Check that the code number on the meter display matches the code number on the test strip vial. Check test strip for damage. Code meter or retest as necessary. Repeat the test. If the error mes- sage appears again, contact LifeScan Customer Care FreePhone at UK: 0800 121200, Republic of Ireland: 1800 535676.

Average of the last 14 days (64	No action required.
tests were performed within
this period).

34

Image 44

Contents Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port PocketScan Test Strips Target AreaImportant Test Strip Information Checking the Display Coding the MeterEnter the Code Mode Match the Code NumbersCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Apply Control Solution Result Appears in 15 SecondsComparing control solution results At UK 0800 Republic of Ireland 1800Testing Your Blood Cock the Penlet II Sampler Getting a Drop of BloodInsert a Lancet in the Penlet II Automatic Blood Sampler Remove the Lancet Wash Your HandsLance Your Finger Step-by-Step Test Procedure Apply Sample Accurate Results in Just 15 SecondsSpecial Messages ExampleUsing the Meter Memory Recall Test Results Exit the Memory Mode Data DownloadingResults References Maintenance BatteriesSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Test Time 15 seconds Calibration Plasma/SerumAutomatic Shutoff Two minutes after last user action Operating RangesSet the Day Changing the DateSet the Year Set the Month Set the Minutes Changing the TimeSet the Hour Exit the Setting Mode Select mmol/L or mg/dLPage Test Page 1998 Visit the LifeScan website at