Lifescan Blood Glucose Monitor System manual Changing the Time, Set the Hour, Set the Minutes

Page 50

Changing the Time

Before setting the time, you must first set the date.

STEP 1

Set the Hour.

Press and release the C button to advance one hour. To move faster, hold the C but- ton down. With the correct hour (with AM or PM) on the display, press the M button and the minutes setting will start flashing.

STEP 2

Set the Minutes.

Press and release the C button to advance one minute. To move faster, hold the C button down. With the correct minute on the display, press the M button and the current unit-of-measurement setting will appear.

Note: Your PocketScan™ Meter displays a 14-day average which you can access from the meter memory. This average is calculated from results obtained during the 14 days preceding the current date and time settings. When the date and time are changed, the 14-day average may change.

40

Image 50

Contents Owner’s Booklet Page Owner’s Booklet 5.8 Dear PocketScan System Owner Page Important Information Table of Contents Using the Meter Memory Viii Getting Started PocketScan Blood Glucose Meter Test Port PocketScan Test Strips Target AreaImportant Test Strip Information Checking the Display Coding the MeterEnter the Code Mode Match the Code NumbersCode the Meter Checking the System with PocketScan Control Solution Do a control solution test Important Control Solution Test Information Insert Test Strip Apply Control Solution Result Appears in 15 SecondsComparing control solution results At UK 0800 Republic of Ireland 1800Testing Your Blood Cock the Penlet II Sampler Getting a Drop of BloodInsert a Lancet in the Penlet II Automatic Blood Sampler Remove the Lancet Wash Your HandsLance Your Finger Step-by-Step Test Procedure Apply Sample Accurate Results in Just 15 SecondsSpecial Messages ExampleUsing the Meter Memory Recall Test Results Exit the Memory Mode Data DownloadingResults References Maintenance BatteriesSymbol appears on the display Display Messages and PROBLEM- Solving Guide Message What IT Means Result. At the end of the count Message What IT Means Message What IT Means Action That Blood Sample was Tests were performed within This period Select the appropriate unit of measurement Probable Cause What to do Automatic Shutoff Two minutes after last user action Test Time 15 secondsCalibration Plasma/Serum Operating RangesSet the Day Changing the DateSet the Year Set the Month Set the Minutes Changing the TimeSet the Hour Exit the Setting Mode Select mmol/L or mg/dLPage Test Page 1998 Visit the LifeScan website at