Invacare Top End Terminator Jr Installing T-ARM Sockets Figure, INSTALLING/REMOVING T-ARMS Figure

Page 20

PROCEDURE 5

ARMS

INSTALLING T-ARM SOCKETS (FIGURE 6)

1.Remove rear wheels from wheelchair. Refer to RE- MOVING/INSTALLING REAR WHEELS in PROCE- DURE 7 of this manual.

2.Position the T-arm clamp on the wheelchair frame as shown in FIGURE 6.

2.Slide T-arm into T-arm socket until the locking lever is in theslotintheT-armsocketandanaudible"click"isheard.

3.PulluponT-armtomakesureT-armislockedinplace.

NOTE: If the T-arm does not slide in the T-arm socket as desired, adjust the T-arm socket. Refer to ADJUST- ING THE T-ARMS in this procedure of the manual.

A R M S

NOTE: T-arm socket must be positioned on outside of wheelchair frame.

3.InstallhexboltsthroughT-armclamp,wheelchairframe andcovedwashersandtightensecurelywithlocknuts.

4.Position the T-arm socket inserts in the T-arm socket as shown in FIGURE 6.

5.Line up the mounting holes in the T-arm socket with the threaded holes in the T-arm clamp.

6.While holding the T-arm socket and the T-arm clamp together, install the four (4) hex screws and washers into mounting holes and tighten loosely.

7.Adjust the T-arm socket. Refer to ADJUSTING THE T-ARMS in this procedure of the manual.

8.Repeat STEPS 2-7 for opposite side of wheelchair.

9.Install the T-arm into the T-arm sockets in this proce- dure of the manual.

4.Adjust the T-arm for desired height, width and depth, if necessary. Refer to ADJUSTING THE T-ARMS in this procedure of the manual.

5.Repeat STEPS 1-4 for opposite side of wheelchair.

Removing T-Arms

1.Press in on the locking lever and lift the T-arm straight up and out of the T-arm socket.

NOTE: If the T-arm does not slide up and down in the T- arm socket as desired, adjust the T-arm socket. Refer to ADJUSTINGTHET-ARMSinthisprocedureofthemanual.

2. Repeat STEP 2 for opposite side of the wheelchair.

 

Wheelchair Frame Locknut

 

 

 

T-Arm Clamp

 

 

T-Arm

 

 

 

 

T-Arm Socket

 

 

 

Inserts

 

 

 

 

 

 

Wheelchair

 

 

 

Coved

Frame

Locking Lever

 

 

 

(Towards the

 

Hex Bolts

Washer

T-Arm

front of the

 

 

wheelchair.)

 

 

 

Socket

 

 

 

 

T-Arm

Hex Screw

 

 

Slot

 

 

 

Socket

Washer

 

FIGURE 7 - INSTALLING/REMOVING T- ARMS

FIGURE 6 - INSTALLING T-ARM SOCKETS

 

 

INSTALLING/REMOVING T-ARMS (FIGURE 7)

Installing T-Arms

1.Position the T-arm over the T-arm socket on the wheelchair frame.

NOTE: Make sure the locking lever is towards the front of the wheelchair.

ADJUSTING THE T-ARMS

Adjusting T-Arm Height (FIGURE 8)

1.Unlock the T-arm by flipping the T-arm release lever towards the inside of the wheelchair.

NOTE: If necessary, pull out on the T-arm release le- ver and rotate 180o so it can be flipped towards the outside of the wheelchair.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Terminator Junior JR Special Notes Table of Contents Specifications General Guidelines SAFETY/HANDLING Wheelchairs ProcedureCoping with Everyday Obstacles Percentage of Weight DistributionStability and Balance Functional Reach From a Wheelchair Reaching, Leaning and Bending ForwardReaching, Leaning Backwards TiltingStairways Transferring to and From Other SeatsSafety Inspection Checklist Initially Inspect Adjust Weekly Monthly PeriodicallyTroubleshooting MaintenanceMaintenance Safety Precautions Suggested Maintenance ProceduresFOLDING/UNFOLDING the Back Figure Changing the Back Angle FigureFolding the Back Unfolding the BackBack Adjustable Tension Straps Replacing Adjustable Tension Back UpholsteryBack Upholstery Cover Slide the back canes out of the back uprightsBack in this procedure of the manual Replacing the Spreader BAR FigureReplacing the Locking Mechanism in the Back Cane Figure CaneInstalling the Stroller Handles Figure Installing the Stroller HandlesUsing Cantilever Arms Figure INSTALLING/REMOVING Cantilever Arms FigureInstalling RemovingAdjusting Cantilever ARM Height Figure Adjusting Cantilever ARM Angle Figures 2Armrest Pad Replacement Armrest PAD ADJUSTMENT/ Replacement FigureArmrest Pad Adjustment Adjusting the T-ARMS Installing T-ARM Sockets FigureINSTALLING/REMOVING T-ARMS Figure Adjusting T-Arm Sockets Figure Adjusting T-Arm Depth FigureAdjusting T-Arm Width Figure Adjusting T-ARM Sockets Replacing the T-ARM Locking Lever FigureAdjusting Rear Seat Height Figure Adjusting Seat Depth Figures 2Replacing Seat PAN Figure PerformSTEPS1-2 ofREPLACINGTHESEATPANA T Determining Frame Height Figure Adjusting Seat Width FigureAdjusting Front SEAT-TO-FLOOR Height Front Seat-to-floor Height Adjustment Ensure wheel locks engage properly. Refer toREMOVING/INSTALLING Rear Wheels Figure Adjusting QUICK-RELEASE Axles FigureAdjusting QUAD-RELEASE Handles Figure Installing QUAD-RELEASE Axles FigureHandrim Replacement Figure Removing Play From Rear WheelsREPAIRING/REPLACING Rear WHEEL, TIRE/TUBE OPENING/CLOSING Clamps FigureCamber Clamps Receiver Tube ClampsAdjusting Rear Wheel Camber Figure Closed PositionDetermining Toe In/Toe Out Figures 8 DETERMINING/ADJUSTING TOE IN/TOE OUTAdjusting Toe In/Toe Out Figure Adjusting Wheelbase Length Figure ING TOE IN/TOE OUT inthisprocedureofthemanualAdjusting Wheelbase Width Figure Replacing Axle Tube FigureRepositioning the Axle Tube Figures 14 E E L S Adjusting Front Caster Height Figure REPOSITIONING/REPLACING Front Casters FigureReplacing Front Casters Repositioning Front CastersWheel Lock ADJUSTMENT/ Replacement Figure Repeat this procedure for the opposite wheel lockRepeat Steps 2-5 on the opposite front caster Engage the wheel lockReplacing Flip-Up Footboard ADJUSTING/REPLACING FLIP-UP Footboard FigureAdjusting Flip-Up Footboard Tubular Footrest Figure ADJUSTING/REPLACING RigidANTI-TIPPER REPLACEMENT/ Adjustment Figure Elastomers and Suspension Replacing Front Elastomers FigurePage Page Limited Warranty One Invacare Way Chedworth Way

Top End Terminator Jr specifications

The Invacare Top End Terminator Jr is a premier wheelchair designed specifically for young athletes, providing both performance and versatility. It caters to the needs of competitive youth athletes, ensuring superior functionality and comfort during sports activities. The Terminator Jr blends advanced technology with thoughtful design, allowing young users to experience the thrill of competitive racing.

One of the standout features of the Terminator Jr is its lightweight aluminum frame. This construction not only enhances portability but also ensures that the wheelchair is robust enough to withstand the rigors of competitive sports. The frame is designed to provide optimal rigidity and stability, which translates into improved performance during races.

The Terminator Jr boasts an adjustable camber. This feature allows users to modify the angle of the wheels for increased speed and maneuverability. By altering the camber, athletes can optimize their performance based on personal preference and training requirements, making it an adaptable choice for different racing conditions and environments.

Another significant aspect of the Terminator Jr is its high-quality wheels and tires. The wheelchair is equipped with specialized racing wheels that offer excellent traction and control on various surfaces. The tires are designed for speed while ensuring stability, contributing to a superior racing experience.

The seat and backrests of the Terminator Jr are designed with comfort and support in mind. The seating system is adjustable, allowing for customization according to the athlete’s size and needs. This level of personalization helps to prevent discomfort during long periods of use, enabling young athletes to focus entirely on their performance.

Additionally, the Terminator Jr includes a variety of accessory options, such as footrests and backrest supports, which can be tailored to the athlete's preferences. This adaptability is key in ensuring that the wheelchair meets the specific requirements of different sports and individual users.

Safety and durability are paramount in the design of the Invacare Top End Terminator Jr. Its superior construction ensures that it can handle the physical demands of competitive racing, providing athletes with peace of mind as they focus on their performance.

In summary, the Invacare Top End Terminator Jr is a cutting-edge racing wheelchair that emphasizes performance, comfort, and customization. With its lightweight aluminum frame, adjustable camber, high-quality wheels, and customizable seating, it stands out as an excellent choice for young athletes committed to excelling in their chosen sports.
Top Page Image Contents