Invacare Top End Terminator Jr manual Replacing Seat PAN Figure, Adjusting Rear Seat Height Figure

Page 23

SEAT

PROCEDURE 6

This Procedure includes the following:

Replacing Seat Pan

Adjusting Rear Seat Height

Adjusting Seat Depth

Adjusting Seat Width

Adjusting Front Seat-to-Floor Height

SPACER

HEIGHT DIFFERENCE

NONE

2-inch

1-inch

1-inch

2-inch

NONE

1.PerformSTEPS1-2 ofREPLACINGTHESEATPAN.

2.InsertorremovespacersontopoftheREARframeclamps.

3.PerformSTEPS3-4 ofREPLACINGTHESEATPAN.

S E

WARNING

AfterANYadjustments,repairorserviceandBEFORE use,makesure all attaching hardware is tightened securely - otherwise injury or damage may result.

REPLACING SEAT PAN (FIGURE 1)

1.Remove the seat cushion from the seat pan.

2.Remove the four (4) phillips screws, locknuts and spacers (if present) that secure the seat pan to the frame clamps.

3.Position NEW seat pan on wheelchair frame, align- ing seat pan mounting holes with frame clamps.

4.Secure the seat pan to the frame clamps with the four (4) phillips screws, locknuts and spacers (if present).

Phillips Screws

Seat Pan

Seat Pan

REAR OF

WHEELCHAIR

Mounting

 

Holes

Spacer

 

FRONT OF

Frame

WHEELCHAIR

Clamps

ADJUSTING SEAT DEPTH (FIGURES 2 AND 3)

WARNING

This procedure must be performed by a quali- fied technician ONLY.

The position of the footrest, camber tube, back angle, the tautness of the back upholstery as well as the user's condition are directly related to the wheelchairs stability. Any change to one (1) or any combination of the five (5) may cause the wheel- chair to decrease in stability. Use EXTREME caution when using a new seating position.

NOTE: Note the position of the front hex screw before removing to ensure proper reinstallation.

1.Remove the hex screws, washers, coved spacers and locknuts that secure the back angle brackets to the wheelchair frame.

2.Refer to the chart in FIGURE 3 to determine mount- ing positions for corresponding seat depths.

3.Position the back assembly with the mounting posi- tion determined in STEP 2.

4.Secure the back assembly to the wheelchair frame with the hex screws, washers, coved washers and locknuts. Refer to FIGURE 2 for correct hardware orientation.

A T

Locknuts

Wheelchair Frame

FIGURE1 - REPLACING SEAT PAN

ADJUSTING REAR SEAT HEIGHT (FIGURE 1)

NOTE: The wheelchair frame is designed to create a 2-inch height difference between the front and the rear of the seat pan. If desired, spacers can be added at the rear of the seat pan to decrease this height differ- ence. Refer to the chart below for the proper spacers.

Back

Small Coved

Washers

Assembly

Spacers

Locknuts

Back

Angle

Bracket

Rear

Hex

Screw

Large

Coved

Spacers Wheelchair

WashersFrame

Front Hex Screw

FIGURE 2 - ADJUSTING SEAT DEPTH

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Terminator Junior JR Special Notes Table of Contents Specifications General Guidelines Procedure SAFETY/HANDLING WheelchairsCoping with Everyday Obstacles Percentage of Weight DistributionStability and Balance Tilting Functional Reach From a WheelchairReaching, Leaning and Bending Forward Reaching, Leaning BackwardsTransferring to and From Other Seats StairwaysInitially Inspect Adjust Weekly Monthly Periodically Safety Inspection ChecklistSuggested Maintenance Procedures TroubleshootingMaintenance Maintenance Safety PrecautionsUnfolding the Back FOLDING/UNFOLDING the Back FigureChanging the Back Angle Figure Folding the BackBack Slide the back canes out of the back uprights Adjustable Tension StrapsReplacing Adjustable Tension Back Upholstery Back Upholstery CoverCane Back in this procedure of the manualReplacing the Spreader BAR Figure Replacing the Locking Mechanism in the Back Cane FigureInstalling the Stroller Handles Installing the Stroller Handles FigureRemoving Using Cantilever Arms FigureINSTALLING/REMOVING Cantilever Arms Figure InstallingAdjusting Cantilever ARM Angle Figures 2 Adjusting Cantilever ARM Height FigureArmrest Pad Replacement Armrest PAD ADJUSTMENT/ Replacement FigureArmrest Pad Adjustment Adjusting the T-ARMS Installing T-ARM Sockets FigureINSTALLING/REMOVING T-ARMS Figure Adjusting T-Arm Sockets Figure Adjusting T-Arm Depth FigureAdjusting T-Arm Width Figure Replacing the T-ARM Locking Lever Figure Adjusting T-ARM SocketsPerformSTEPS1-2 ofREPLACINGTHESEATPAN Adjusting Rear Seat Height FigureAdjusting Seat Depth Figures 2 Replacing Seat PAN FigureA T Determining Frame Height Figure Adjusting Seat Width FigureAdjusting Front SEAT-TO-FLOOR Height Ensure wheel locks engage properly. Refer to Front Seat-to-floor Height AdjustmentAdjusting QUICK-RELEASE Axles Figure REMOVING/INSTALLING Rear Wheels FigureRemoving Play From Rear Wheels Adjusting QUAD-RELEASE Handles FigureInstalling QUAD-RELEASE Axles Figure Handrim Replacement FigureReceiver Tube Clamps REPAIRING/REPLACING Rear WHEEL, TIRE/TUBEOPENING/CLOSING Clamps Figure Camber ClampsClosed Position Adjusting Rear Wheel Camber FigureDetermining Toe In/Toe Out Figures 8 DETERMINING/ADJUSTING TOE IN/TOE OUTAdjusting Toe In/Toe Out Figure ING TOE IN/TOE OUT inthisprocedureofthemanual Adjusting Wheelbase Length FigureReplacing Axle Tube Figure Adjusting Wheelbase Width FigureRepositioning the Axle Tube Figures 14 E E L S Repositioning Front Casters Adjusting Front Caster Height FigureREPOSITIONING/REPLACING Front Casters Figure Replacing Front CastersEngage the wheel lock Wheel Lock ADJUSTMENT/ Replacement FigureRepeat this procedure for the opposite wheel lock Repeat Steps 2-5 on the opposite front casterReplacing Flip-Up Footboard ADJUSTING/REPLACING FLIP-UP Footboard FigureAdjusting Flip-Up Footboard Tubular Footrest Figure ADJUSTING/REPLACING RigidANTI-TIPPER REPLACEMENT/ Adjustment Figure Replacing Front Elastomers Figure Elastomers and SuspensionPage Page Limited Warranty One Invacare Way Chedworth Way

Top End Terminator Jr specifications

The Invacare Top End Terminator Jr is a premier wheelchair designed specifically for young athletes, providing both performance and versatility. It caters to the needs of competitive youth athletes, ensuring superior functionality and comfort during sports activities. The Terminator Jr blends advanced technology with thoughtful design, allowing young users to experience the thrill of competitive racing.

One of the standout features of the Terminator Jr is its lightweight aluminum frame. This construction not only enhances portability but also ensures that the wheelchair is robust enough to withstand the rigors of competitive sports. The frame is designed to provide optimal rigidity and stability, which translates into improved performance during races.

The Terminator Jr boasts an adjustable camber. This feature allows users to modify the angle of the wheels for increased speed and maneuverability. By altering the camber, athletes can optimize their performance based on personal preference and training requirements, making it an adaptable choice for different racing conditions and environments.

Another significant aspect of the Terminator Jr is its high-quality wheels and tires. The wheelchair is equipped with specialized racing wheels that offer excellent traction and control on various surfaces. The tires are designed for speed while ensuring stability, contributing to a superior racing experience.

The seat and backrests of the Terminator Jr are designed with comfort and support in mind. The seating system is adjustable, allowing for customization according to the athlete’s size and needs. This level of personalization helps to prevent discomfort during long periods of use, enabling young athletes to focus entirely on their performance.

Additionally, the Terminator Jr includes a variety of accessory options, such as footrests and backrest supports, which can be tailored to the athlete's preferences. This adaptability is key in ensuring that the wheelchair meets the specific requirements of different sports and individual users.

Safety and durability are paramount in the design of the Invacare Top End Terminator Jr. Its superior construction ensures that it can handle the physical demands of competitive racing, providing athletes with peace of mind as they focus on their performance.

In summary, the Invacare Top End Terminator Jr is a cutting-edge racing wheelchair that emphasizes performance, comfort, and customization. With its lightweight aluminum frame, adjustable camber, high-quality wheels, and customizable seating, it stands out as an excellent choice for young athletes committed to excelling in their chosen sports.
Top Page Image Contents