Invacare Top End Terminator Jr manual ADJUSTING/REPLACING Rigid, Tubular Footrest Figure

Page 39

FOOTREST/ANTI-TIPPER

 

PROCEDURE 8

ADJUSTING/REPLACING RIGID

5.

Ensure the push pins are fully engaged in the

TUBULAR FOOTREST (FIGURE 2)

 

mounting holes of the anti-tipper socket.

6.

Repeat STEPS 1-5 for the opposite anti-tipper if

1. Loosen the two (2) Allen Screws that secure the

 

necessary.

 

 

footrest to the wheelchair frame.

If Replacing the Footrest:

1. Remove EXISTING and install NEW footrest.

WARNING

The standard footrest has an open hoop. A footplate cover is recommended for wheelchair users that have leg spasticity or whose feet have a possibility of falling through the footrest hoop. A calf strap is provided with each wheelchair to prevent the feet from slipping backwards off of the footrest. Be sure the calf strap is secure when using the wheelchair.

If Replacing or Adjusting the Footrest:

1.Position NEW/EXISTING footrest to desired height.

2.Tighten the two (2) Allen Screws that secure the footrest to the wheelchair frame.

Allen Wheelchair

ScrewsFrame

Adjustment

NOTE: If the rear wheel size is changed or the position of the adjustable axle camber bar is changed, the anti-tip- pers MUST be readjusted to maintain a 1-1/2 to 2-inch clearance between the bottom of anti-tipper wheels and floor.

1.Press the push pin securing the anti-tipper exten- sion to the anti-tipper bar.

2.Position the anti-tipper extension to one (1) of four (4) mounting holes which allow a 1-1/2 to 2-inch clear- ance of the wheels to the floor.

NOTE: A 1-1/2 to 2-inch clearance between the bot- tom of the anti-tipper wheels and the floor must be maintained.

8.Ensure the push pin is fully engaged in the anti- tipper extension mounting hole.

9.Repeat procedure for opposite anti-tipper if nec- essary.

F O O T R E S T

Footrest

FIGURE 2 - ADJUSTING/REPLACING STANDARD

FOOTREST

DETAIL "A" - ANTI-TIPPER

ADJUSTMENT HOLES

A N T I

ANTI-TIPPER REPLACEMENT/ ADJUSTMENT (FIGURE 3)

Release

Anti-tipper

Bar

Camber Mounting

T

I

P P

Replacement

1.Press in the two (2) push pins that secure the EXIST- ING anti-tipper bar to the anti-tipper socket.

2.Remove the anti-tipper bar from the anti-tipper socket.

Buttons

Anti-tipper

Extension

Clamp Hole

E R

4.Insert the NEW anti-tipper bar into the anti-tipper socket.

Anti-tipper Socket

1-1/2 to 2-inch clearance

FIGURE 3 - ANTI-TIPPER ADJUSTMENT/REPLACEMENT

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Terminator Junior JR Special Notes Table of Contents Specifications General Guidelines Procedure SAFETY/HANDLING WheelchairsPercentage of Weight Distribution Stability and BalanceCoping with Everyday Obstacles Tilting Functional Reach From a WheelchairReaching, Leaning and Bending Forward Reaching, Leaning BackwardsTransferring to and From Other Seats StairwaysInitially Inspect Adjust Weekly Monthly Periodically Safety Inspection ChecklistSuggested Maintenance Procedures TroubleshootingMaintenance Maintenance Safety PrecautionsUnfolding the Back FOLDING/UNFOLDING the Back FigureChanging the Back Angle Figure Folding the BackBack Slide the back canes out of the back uprights Adjustable Tension StrapsReplacing Adjustable Tension Back Upholstery Back Upholstery CoverCane Back in this procedure of the manualReplacing the Spreader BAR Figure Replacing the Locking Mechanism in the Back Cane FigureInstalling the Stroller Handles Installing the Stroller Handles FigureRemoving Using Cantilever Arms FigureINSTALLING/REMOVING Cantilever Arms Figure InstallingAdjusting Cantilever ARM Angle Figures 2 Adjusting Cantilever ARM Height FigureArmrest PAD ADJUSTMENT/ Replacement Figure Armrest Pad AdjustmentArmrest Pad Replacement Installing T-ARM Sockets Figure INSTALLING/REMOVING T-ARMS FigureAdjusting the T-ARMS Adjusting T-Arm Depth Figure Adjusting T-Arm Width FigureAdjusting T-Arm Sockets Figure Replacing the T-ARM Locking Lever Figure Adjusting T-ARM SocketsPerformSTEPS1-2 ofREPLACINGTHESEATPAN Adjusting Rear Seat Height FigureAdjusting Seat Depth Figures 2 Replacing Seat PAN FigureA T Adjusting Seat Width Figure Adjusting Front SEAT-TO-FLOOR HeightDetermining Frame Height Figure Ensure wheel locks engage properly. Refer to Front Seat-to-floor Height AdjustmentAdjusting QUICK-RELEASE Axles Figure REMOVING/INSTALLING Rear Wheels FigureRemoving Play From Rear Wheels Adjusting QUAD-RELEASE Handles FigureInstalling QUAD-RELEASE Axles Figure Handrim Replacement FigureReceiver Tube Clamps REPAIRING/REPLACING Rear WHEEL, TIRE/TUBEOPENING/CLOSING Clamps Figure Camber ClampsClosed Position Adjusting Rear Wheel Camber FigureDETERMINING/ADJUSTING TOE IN/TOE OUT Adjusting Toe In/Toe Out FigureDetermining Toe In/Toe Out Figures 8 ING TOE IN/TOE OUT inthisprocedureofthemanual Adjusting Wheelbase Length FigureReplacing Axle Tube Figure Adjusting Wheelbase Width FigureRepositioning the Axle Tube Figures 14 E E L S Repositioning Front Casters Adjusting Front Caster Height FigureREPOSITIONING/REPLACING Front Casters Figure Replacing Front CastersEngage the wheel lock Wheel Lock ADJUSTMENT/ Replacement FigureRepeat this procedure for the opposite wheel lock Repeat Steps 2-5 on the opposite front casterADJUSTING/REPLACING FLIP-UP Footboard Figure Adjusting Flip-Up FootboardReplacing Flip-Up Footboard ADJUSTING/REPLACING Rigid ANTI-TIPPER REPLACEMENT/ Adjustment FigureTubular Footrest Figure Replacing Front Elastomers Figure Elastomers and SuspensionPage Page Limited Warranty One Invacare Way Chedworth Way

Top End Terminator Jr specifications

The Invacare Top End Terminator Jr is a premier wheelchair designed specifically for young athletes, providing both performance and versatility. It caters to the needs of competitive youth athletes, ensuring superior functionality and comfort during sports activities. The Terminator Jr blends advanced technology with thoughtful design, allowing young users to experience the thrill of competitive racing.

One of the standout features of the Terminator Jr is its lightweight aluminum frame. This construction not only enhances portability but also ensures that the wheelchair is robust enough to withstand the rigors of competitive sports. The frame is designed to provide optimal rigidity and stability, which translates into improved performance during races.

The Terminator Jr boasts an adjustable camber. This feature allows users to modify the angle of the wheels for increased speed and maneuverability. By altering the camber, athletes can optimize their performance based on personal preference and training requirements, making it an adaptable choice for different racing conditions and environments.

Another significant aspect of the Terminator Jr is its high-quality wheels and tires. The wheelchair is equipped with specialized racing wheels that offer excellent traction and control on various surfaces. The tires are designed for speed while ensuring stability, contributing to a superior racing experience.

The seat and backrests of the Terminator Jr are designed with comfort and support in mind. The seating system is adjustable, allowing for customization according to the athlete’s size and needs. This level of personalization helps to prevent discomfort during long periods of use, enabling young athletes to focus entirely on their performance.

Additionally, the Terminator Jr includes a variety of accessory options, such as footrests and backrest supports, which can be tailored to the athlete's preferences. This adaptability is key in ensuring that the wheelchair meets the specific requirements of different sports and individual users.

Safety and durability are paramount in the design of the Invacare Top End Terminator Jr. Its superior construction ensures that it can handle the physical demands of competitive racing, providing athletes with peace of mind as they focus on their performance.

In summary, the Invacare Top End Terminator Jr is a cutting-edge racing wheelchair that emphasizes performance, comfort, and customization. With its lightweight aluminum frame, adjustable camber, high-quality wheels, and customizable seating, it stands out as an excellent choice for young athletes committed to excelling in their chosen sports.
Top Page Image Contents