Invacare Top End Terminator Jr manual Adjusting Rear Wheel Camber Figure, Closed Position

Page 30

PROCEDURE 7

WHEELS

W

H

E

CAMBER CLAMPS

OPEN Quick Hex

POSITION Release Screw

Lever

CLOSED

POSITION

6.Positionthecamberinserttothedesiredposition.Make surethereisnomorethan3-inches(12indexingmarks) of the camber inserts outside of the axle tube.

7.Slide the indexing ring on the camber insert until it is flush with the camber clamp.

 

NOTE: Before using the wheelchair, make sure both cam-

 

ber inserts are set to the same indexing mark. This will

 

make sure the distance between the rear wheel and the

Locknut

wheelchair is the same on both sides.

 

E L S

QUICK RELEASE LEVER

STANDARD

RECEIVER TUBE CLAMPS

CLOSED POSITION

Quick

Release

Lever

Hex Screw Locknut

OPEN POSITION

QUICK RELEASE LEVER

STANDARD

FIGURE 6 - OPENING/CLOSING CLAMPS

ADJUSTING REAR WHEEL CAMBER (FIGURE 7)

NOTE: Perform this procedure to one (1) side of the wheel- chair at a time for ease of adjustment.

1.Open the camber clamps. Refer to OPENING/CLOS- ING CLAMPS in this procedure of the manual.

2.Pull one (1) rear wheel with camber insert out of axle tube.

3.Remove the rear wheel from the camber insert.

4.Rotate the camber insert 180o.

5.Reinstall the rear wheel into the camber insert.

WARNING

NEVER position the camber inserts in the axle tube with more than 3-inches (12 indexing marks show- ing) of the camber insert outside of the axle tube. The camber inserts will not be securely tightened in the axle tube resulting in possible injury to the user and/or damage to the wheelchair.

WARNING

QUICK RELEASE LEVERS - Make sure the quick re- lease levers are pointing towards the rear of the wheelchair and are in the CLOSED position BE- FORE using the wheelchair, otherwise personal injury or damage to the wheelchair may result.

STANDARD - Make sure the hex screws and lock- nuts are securely tightened BEFORE using the wheelchair, otherwise personal injury or damage to the wheelchair may result.

8.Close the camber clamps. Refer toOPENING/CLOS- ING CLAMPS in this procedure of the manual.

9.Repeat STEPS 1-8 for opposite side of wheelchair.

10.Reinstall rear wheel to the wheelchair. Refer to RE- MOVING/INSTALLING REAR WHEELS in this pro- cedure of the manual.

11.Adjust toe in/toe out of wheelchair. Refer to DETER- MINING/ADJUSTING TOE IN/TOE OUT in this pro- cedure of the manual.

Camber Insert -

CamberRotate 180o

Clamp

Indexing Ring

Indexing Marks

Axle Tube

FIGURE 7 - ADJUSTING REAR WHEEL CAMBER

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Terminator Junior JR Special Notes Table of Contents Specifications General Guidelines SAFETY/HANDLING Wheelchairs ProcedurePercentage of Weight Distribution Stability and BalanceCoping with Everyday Obstacles Reaching, Leaning Backwards Functional Reach From a WheelchairReaching, Leaning and Bending Forward TiltingStairways Transferring to and From Other SeatsSafety Inspection Checklist Initially Inspect Adjust Weekly Monthly PeriodicallyMaintenance Safety Precautions TroubleshootingMaintenance Suggested Maintenance ProceduresFolding the Back FOLDING/UNFOLDING the Back FigureChanging the Back Angle Figure Unfolding the BackBack Back Upholstery Cover Adjustable Tension StrapsReplacing Adjustable Tension Back Upholstery Slide the back canes out of the back uprightsReplacing the Locking Mechanism in the Back Cane Figure Back in this procedure of the manualReplacing the Spreader BAR Figure CaneInstalling the Stroller Handles Figure Installing the Stroller HandlesInstalling Using Cantilever Arms FigureINSTALLING/REMOVING Cantilever Arms Figure RemovingAdjusting Cantilever ARM Height Figure Adjusting Cantilever ARM Angle Figures 2Armrest PAD ADJUSTMENT/ Replacement Figure Armrest Pad AdjustmentArmrest Pad Replacement Installing T-ARM Sockets Figure INSTALLING/REMOVING T-ARMS FigureAdjusting the T-ARMS Adjusting T-Arm Depth Figure Adjusting T-Arm Width FigureAdjusting T-Arm Sockets Figure Adjusting T-ARM Sockets Replacing the T-ARM Locking Lever FigureReplacing Seat PAN Figure Adjusting Rear Seat Height FigureAdjusting Seat Depth Figures 2 PerformSTEPS1-2 ofREPLACINGTHESEATPANA T Adjusting Seat Width Figure Adjusting Front SEAT-TO-FLOOR HeightDetermining Frame Height Figure Front Seat-to-floor Height Adjustment Ensure wheel locks engage properly. Refer toREMOVING/INSTALLING Rear Wheels Figure Adjusting QUICK-RELEASE Axles FigureHandrim Replacement Figure Adjusting QUAD-RELEASE Handles FigureInstalling QUAD-RELEASE Axles Figure Removing Play From Rear WheelsCamber Clamps REPAIRING/REPLACING Rear WHEEL, TIRE/TUBEOPENING/CLOSING Clamps Figure Receiver Tube ClampsAdjusting Rear Wheel Camber Figure Closed PositionDETERMINING/ADJUSTING TOE IN/TOE OUT Adjusting Toe In/Toe Out FigureDetermining Toe In/Toe Out Figures 8 Adjusting Wheelbase Length Figure ING TOE IN/TOE OUT inthisprocedureofthemanualAdjusting Wheelbase Width Figure Replacing Axle Tube FigureRepositioning the Axle Tube Figures 14 E E L S Replacing Front Casters Adjusting Front Caster Height FigureREPOSITIONING/REPLACING Front Casters Figure Repositioning Front CastersRepeat Steps 2-5 on the opposite front caster Wheel Lock ADJUSTMENT/ Replacement FigureRepeat this procedure for the opposite wheel lock Engage the wheel lockADJUSTING/REPLACING FLIP-UP Footboard Figure Adjusting Flip-Up FootboardReplacing Flip-Up Footboard ADJUSTING/REPLACING Rigid ANTI-TIPPER REPLACEMENT/ Adjustment FigureTubular Footrest Figure Elastomers and Suspension Replacing Front Elastomers FigurePage Page Limited Warranty One Invacare Way Chedworth Way

Top End Terminator Jr specifications

The Invacare Top End Terminator Jr is a premier wheelchair designed specifically for young athletes, providing both performance and versatility. It caters to the needs of competitive youth athletes, ensuring superior functionality and comfort during sports activities. The Terminator Jr blends advanced technology with thoughtful design, allowing young users to experience the thrill of competitive racing.

One of the standout features of the Terminator Jr is its lightweight aluminum frame. This construction not only enhances portability but also ensures that the wheelchair is robust enough to withstand the rigors of competitive sports. The frame is designed to provide optimal rigidity and stability, which translates into improved performance during races.

The Terminator Jr boasts an adjustable camber. This feature allows users to modify the angle of the wheels for increased speed and maneuverability. By altering the camber, athletes can optimize their performance based on personal preference and training requirements, making it an adaptable choice for different racing conditions and environments.

Another significant aspect of the Terminator Jr is its high-quality wheels and tires. The wheelchair is equipped with specialized racing wheels that offer excellent traction and control on various surfaces. The tires are designed for speed while ensuring stability, contributing to a superior racing experience.

The seat and backrests of the Terminator Jr are designed with comfort and support in mind. The seating system is adjustable, allowing for customization according to the athlete’s size and needs. This level of personalization helps to prevent discomfort during long periods of use, enabling young athletes to focus entirely on their performance.

Additionally, the Terminator Jr includes a variety of accessory options, such as footrests and backrest supports, which can be tailored to the athlete's preferences. This adaptability is key in ensuring that the wheelchair meets the specific requirements of different sports and individual users.

Safety and durability are paramount in the design of the Invacare Top End Terminator Jr. Its superior construction ensures that it can handle the physical demands of competitive racing, providing athletes with peace of mind as they focus on their performance.

In summary, the Invacare Top End Terminator Jr is a cutting-edge racing wheelchair that emphasizes performance, comfort, and customization. With its lightweight aluminum frame, adjustable camber, high-quality wheels, and customizable seating, it stands out as an excellent choice for young athletes committed to excelling in their chosen sports.
Top Page Image Contents