Cortelco 2740 instruction manual Time and Date, Press Down Arrow, Message Waiting Lamp

Page 22

4.Miscellaneous Settings

4.1Time and Date

a.Press MENU. The display will read “Phone Setting.”

b.Press the DOWN ARROW repeatedly until “Time/Date Set” appears in the display

c.Press ENTER. The display will show the currently set time

d.Press the soft key under CHANGE

e.Enter the time as instructed in the display

f.Press DOWN ARROW

g.Press CHANGE to choose between AM or PM

h.Press DOWNARROW. The display will show the currently set date.

i.Press the soft key under CHANGE

j.Enter the date as instructed in the display.

k.Press MENU to exit.

Follow these same steps whenever you wish to adjust your system’s clock.

Note: If you subscribe to caller ID service from your local telephone company, there is no need to set the time and date. This will be set automatically by the caller ID information, and will be updated with each new call.

4.2Message Waiting Lamp

The MSG lamp on the 2740 will flash when a voice mail signal is received. Note that you must be sub- scribed to voice mail from your telephone company or be connected to a PBX which provides voice mail signaling for this function to work correctly.

4.2.1Message Waiting Line Selection

The 2740 can detect voice mail signals on any of the four lines. By default, the 2740 is set to respond to messages on Line 1. Follow the instructions below to set your voice mail detector to the proper line.

a.Press MENU

b.Press ENTER

c.Press DOWN ARROW repeatedly until “Telco VMWI” appears in the display.

d.Press ENTER. The display will read “VMWI: LINE 1.”

e.Press CHANGE repeatedly to select LINE 2, LINE 3, LINE 4, or OFF

4.2.2Message Waiting Mode Selection

The 2740 can respond to either FSK or Stutter Dial Tone (SDT) message waiting signaling. To change the mode follow the steps below after selecting the desired line as described in Section 4.21.

a.Press DOWN ARROW. The display will read “VMWI: FSK.”

b.Press CHANGE to select SDT. This will activate the stutter dial tone detector.

c.Press MENU to exit

22

Image 22

Contents OWNER’S Instruction Manual Table of Contents Using standard telephones Thank YOU For Purchasing Important Safety Instructions Unpacking and Installation Box ContentsTelephone Part Identification Standard Installation Installation Identify Your Existing Wiring SystemPlan Your Installation Installations with Private Lines and Unconnected LinesInstall Batteries Optional Assign a Station NumberConnect Cords to Telephone Verify Proper InstallationStation NumberAssignment Station Name Assignment ChangeCommon Line ConfigurationLoop Voltage Detector Setting Distinctive Ringing Ringer ConfigurationTo choose how each line will ring Setting Off-Hook Ringing Intercom Call Response and PagingTo block pages at your telephone To choose how your phone will respond to intercom callsAutomatic Line Selection Toll Restriction To completely restrict specific lines at a telephone To set the allowed numbers at a particular telephoneDialing Mode To Change the Privacy Setting At Station #01System Privacy To enter HOME, LOCAL, and 1 Plus 7 area codes Memory FeaturesArea Codes Storing a hyphen into memoryStoring a Caller ID number into memory Storing temporary tone dialing into memoryStoring one of the last five numbers dialed into memory To store a memory dial numberTo Store Caller ID Calls To Store the Centrex prefixPress Down Arrow Message Waiting Mode SelectionTime and Date Message Waiting LampCaller ID on Call Waiting Cidcw Sensitivity Adjusting Auto Hold Drop TimeAdjusting Flash Length Held Call ReminderErase Toll Restrictions At station #01 Erase All Feature SettingsErase Numbers Stored in Memory Making and Answering CallsHold Placing a Call on Hold Redial To redial the last phone number dialedTo redial any of the last five phone numbers dialed Making a call on another lineOutside Call with Intercom Station ConferenceOutside Calls Transfer Attended TransferCaller ID Transfer RingPersonal Ring Incoming callDeleting Numbers Volume LevelsVoice Mail Message Waiting Accessing Messages RingerMute Resetting MSG LampFlash Do Not Disturb DNDToll Restriction Removal Single Call Line ReserveCall Privacy Toll Restriction Removal Single StationElapsed Call Time Previous Calls Timer Elapsed Call TimeTimer Reset HeadsetIntercom Calls Personal DirectoryPredialing Intercom while IdleAnswering an Intercom Call while on an Outside Call Intercom VoiceIntercom Handsfree PagingIntercom Line Status and Calls on HoldFax Machines and Modems Power Failure Operation Battery ReplacementOutlet that is not controlled by a wall switch Phone Setting Menu Top LevelMenu Option SUB Menu Default Available OPTIONS/COMMENT Memory Setting Menu Time/Date SetAdvanced Setting Option FCC Information Telephone Repair Limited Warranty