Cortelco 2740 instruction manual Caller ID on Call Waiting Cidcw Sensitivity, Held Call Reminder

Page 23

4.3Caller ID on Call Waiting (CIDCW) Sensitivity

If your 2740 does not respond correctly to CIDCW signals, it may be necessary to adjust the sensitivity.

a.Press MENU,

b.Press ENTER

c.Press DOWN ARROW repeatedly. “CIDCW: High Sens” or “CIDCW: Low Sens” appears in the display

d.Press CHANGE to change sensitivity

e.Press MENU to exit.

4.4Held Call Reminder

Your 2740 is factory-set to automatically alert you at 2 minutes, and then every 2 minutes thereafter, if a caller is still on hold. This feature is designed to prevent calls from accidentally being left on hold for long periods. If you would prefer a different first reminder time, you may change the setting to 30 seconds or 1 minute, or you may set the Held Call Reminder to OFF.

a.Press MENU. The display will read “Phone Setting

b.Press ENTER

c.Press DownArrow repeatedly until “Hold Remind:” appears in the display

d.Press the soft key under CHANGE repeatedly until the desired held call reminder time is displayed.

e.Press MENU to exit.

4.5Adjusting Auto Hold Drop Time

Your 2740 telephone is factory-set to automatically drop a call if it is on hold for more than 30 minutes. This feature is designed to prevent calls from accidentally being placed on hold indefinitely. If you would prefer a different length of time, you may change the setting to 5 minutes or 15 minutes.

a.Press MENU

b.Press DOWN ARROW repeatedly until “Advanced Setting” appears in the display

c.Press ENTER

d.Press DOWNARROW repeatedly until “Hold Drop” appears in the display

e.Press ENTER. The display will show the currently set hold drop time.

f.Press the soft key under CHANGE repeatedly, until the desired hold drop time is displayed.

g.Press MENU to exit.

4.6Adjusting Flash Length

Your 2740 telephone is factory-set to have a flash length of 600 milliseconds, which is appropriate for most environments. However, if your installation requires a different flash length, you may change the length to 100 milliseconds, 300 milliseconds, or 1 second.

a.Press MENU

b.Press DOWN ARROW repeatedly until “Advanced Setting” appears in the display

c.Press ENTER.

d.Press DOWN ARROW repeatedly until “Flash Time” appears in the display

e.Press ENTER.

f.Press the soft key under CHANGE repeatedly, until the desired flash length is displayed.

g.Press MENU to exit.

23

Image 23
Contents OWNER’S Instruction Manual Table of Contents Using standard telephones Thank YOU For Purchasing Important Safety Instructions Box Contents Unpacking and InstallationTelephone Part Identification Installations with Private Lines and Unconnected Lines Installation Identify Your Existing Wiring SystemPlan Your Installation Standard InstallationAssign a Station Number Install Batteries OptionalStation NumberAssignment Verify Proper InstallationConnect Cords to Telephone Change Station Name AssignmentLoop Voltage Detector Line ConfigurationCommon To choose how each line will ring Ringer ConfigurationSetting Distinctive Ringing Intercom Call Response and Paging Setting Off-Hook RingingAutomatic Line Selection To choose how your phone will respond to intercom callsTo block pages at your telephone Toll Restriction To set the allowed numbers at a particular telephone To completely restrict specific lines at a telephoneSystem Privacy To Change the Privacy Setting At Station #01Dialing Mode Storing a hyphen into memory Memory FeaturesArea Codes To enter HOME, LOCAL, and 1 Plus 7 area codesTo store a memory dial number Storing temporary tone dialing into memoryStoring one of the last five numbers dialed into memory Storing a Caller ID number into memoryTo Store the Centrex prefix To Store Caller ID CallsMessage Waiting Lamp Message Waiting Mode SelectionTime and Date Press Down ArrowHeld Call Reminder Adjusting Auto Hold Drop TimeAdjusting Flash Length Caller ID on Call Waiting Cidcw SensitivityMaking and Answering Calls Erase All Feature SettingsErase Numbers Stored in Memory Erase Toll Restrictions At station #01Making a call on another line Redial To redial the last phone number dialedTo redial any of the last five phone numbers dialed Hold Placing a Call on HoldTransfer Attended Transfer ConferenceOutside Calls Outside Call with Intercom StationIncoming call Transfer RingPersonal Ring Caller IDRinger Volume LevelsVoice Mail Message Waiting Accessing Messages Deleting NumbersDo Not Disturb DND Resetting MSG LampFlash MuteToll Restriction Removal Single Station Line ReserveCall Privacy Toll Restriction Removal Single CallHeadset Timer Elapsed Call TimeTimer Reset Elapsed Call Time Previous CallsIntercom while Idle Personal DirectoryPredialing Intercom CallsPaging Intercom VoiceIntercom Handsfree Answering an Intercom Call while on an Outside CallFax Machines and Modems Line Status and Calls on HoldIntercom Outlet that is not controlled by a wall switch Battery ReplacementPower Failure Operation Top Level Phone Setting MenuMenu Option SUB Menu Default Available OPTIONS/COMMENT Time/Date Set Memory Setting MenuAdvanced Setting Option FCC Information Telephone Repair Limited Warranty