Radio Shack 43-3704 Mute Microphone, Tone Dialing Switch Over, Travelling OUT-OF-RANGE

Page 35

MUTE MICROPHONE

You can temporarily mute the microphone so that the caller cannot hear you. Press MUTE during talk mode (while the phone is in use) to mute the microphone.

Mute On and appear in the display. To cancel muting, repeat above step again when Mute is set to on, Mute Off appears.

TONE DIALING SWITCH OVER

Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch- over to tone dialing during the call. This feature is useful when you need tone dialing to use automated systems, for example, entering your bank account number after you have called your bank. Ô

Initially make your call with the pulse dialing mode. Once your call connects, press

/TONE/<. Enter the desired number. These digits will be sent as tone dialing. Once the call ends, the tone mode is canceled and pulse dialing mode resumes.

TRAVELLING OUT-OF-RANGE

During a call, as you begin to move your handset too far from your base unit, noise may increase. If you pass the range limits of the base unit, you will hear a beep and see Out of Range on the display, and then the handset returns to standby mode.

PRIVACY MODE

Privacy mode prevents interruption from another handset. This works only when the phone is in use.

While on a call, press the MENU soft key on the handset. use CID/VOL/ or REDIAL/P/ to select Privacy Mode, and then the OK soft key.

Ô NOTES Ô

•The tone feature only applies when the dial mode is set to pulse.

This special number can be stored in a memory location.

•This is referred to as Chain Dialing (see “Testing Stored Emergency Numbers” on page 44).

•If another handset is in Privacy Mode, you cannot join the call. If someone is using the

handset in Privacy Mode, Unavailable appears in the display when you try to join the call.

Using Your Phone

35

Image 35

Contents 43-3704 Contents Introduction FCC Statement InformationSurge Protection Important Safety Instructions Important Caller ID Information Read this Before InstallationSelecting a Location InstallationOn a Wall Plate or Wall On a Desk TopBase downward to secure it CONNECTING/CHARGING the Battery Pack Recharging the Battery PackInstallation To remove the beltclip Installing a BeltclipUsing a Headset To attach the beltclipAnimation Displays Example of the standby mode displayDisplay and Icons Soft KEY Function Talk modeMain Menu Options Default SettingsUsing DirectLink Mode Setting Menu OptionsDirectLink Mode Using the InterfaceConfirmation tone, and DirectLink Handset SetupUsing Room Monitor Room MonitorSelecting a Ringer Tone Selecting a Ringer VolumePress the OK soft key. You will hear a confirmation tone Distinctive Ringer Setup Setting the True Banner Setting the AutoTalkSetting the Anykey Answer Selecting a Language Setting the Key Touch ToneSetting Room Monitor Setting the Animation ScreenSetting the Ring Time Answering System SetupSetting a PIN Code Setting the Record Time Turning the message alert tone off from a remote location Setting the Language of your Answering SystemTurning the message alert tone off by pressing any key Setting Day and Time Global SetupSetting the Call Screen Setting the Area Code Setting Cidcw Caller ID on Call WaitingSetting the Dial Mode Making a Call Using Your PhoneFrom the handset DE-REGISTER the HandsetReceiving a Call From the Handset SpeakerphonePlacing a Call on Hold Switching to the Handset Speakerphone During a CallHanging UP Call WaitingStoring a Redial Record Deleting a Redial RecordDo not Disturb DND Adjusting the Handset Earpiece and Speaker VolumeTravelling OUT-OF-RANGE Tone Dialing Switch OverPrivacy Mode Mute MicrophoneConferencing Joining a Conference CallConferencing with one outside line Conferencing with 2 outside linesFind Handset Flash and Call WaitingStoring Phone Numbers NAMES, Distinctive Rings Speed Dial PhonebookSpeed Dial appears. Press Steps for Entering Names and Special CharactersIf you make a mistake while entering a name Viewing the PhonebookTo hang up press END Making Calls Using the PhonebookSpeed Dialing To finish the viewing operation, pressEditing the Stored Data Editing or Erasing a DataDeleting the Stored Data Copying Phonebook LocationsTesting Stored Emergency Numbers Caller ID and Cidcw Caller ID on Call Waiting Caller IDViewing the Caller ID List Calling a party from the Caller ID list Using the Caller ID Message ListDeleting Information from the Caller ID List Deleting all Caller ID names/ numbersStoring Caller ID messages in the Phonebook Long Distance calls and Area Code Setting/CancellationViewing the Caller ID List on Call Waiting Deluxe Features Register the Handset to the Base Expanding Your PhoneDual Handset Expandability DirectLink call Using the Directlink ModeINTERCOM/CALL Transfer Feature From handset to handset Call Transfer FeatureIntercom Expanding Your Phone Integrated Answering Device FeaturesRecording a personal outgoing message Greeting Setting your outgoing message GreetingSetting UP Your Answering System Ô Pre-recorded messageDeleting an outgoing message Adjusting the Speaker Volume LevelChoosing between the two outgoing messages REPEAT/SELECT until you hear the correct hour setting Answering System SettingsSetting the Time LED stops flashing when all new messages are played backSetting the ring time Setting a PIN codePress CLOCK/MENU three times Selecting the message record timePress SET Confirmation tone sounds, the system Announce only featureSetting the message alert Selecting the language To screen an incoming call, do the steps as follows Setting the call screenScreening a call From the baseFrom the handset Using Your Answering SystemTo cancel the call screen, press END Playing your messagesRepeating a message To maintain maximum record time, delete the old messages. Ô Skipping a messageDeleting a message System returns to standby Voice memoRecording a conversation Remote Operation Remote access away from homeFunction Remote access with the handset ∅/4 Deleting a Message Stop Operation Ô Remote Key FunctionSymptom Suggestion TroubleshootingKeep the handset away from microwave ovens Care Service and RepairPage Memo Fort Worth, Texas RadioShack Corporation