Color profile: Disabled Composite Default screen
NOTE
Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby. You may also press MEM to exit a memory menu at any time.
HINT
The character menu consists of letters, symbols, and numbers.
NOTE
The pause button counts as one digit. Pressing PAUSE more than once increases the length
of pause between numbers.
22
FLASH AND CALL WAITING
If you have “call waiting” service and a call waiting tone sounds while you are on a call, press FLASH to accept the waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, press FLASH again.
STORING A PHONE NUMBER IN MEMORY
1) | Remove the handset from the base. |
|
2) | Press and hold MEM for two seconds. |
|
Memory Store | ||
| The following screen appears. | 1> |
|
| 2 |
3)Use the : and ; keys or number keypad to choose the memory location where you would like to enter a number.
4) Press SELECT. The following screen appears, |
|
Store Name | |
and a cursor flashes indicating that the | ❚ |
display is ready for the name to be entered. |
|
5)Use the : and ;keys to scroll through the character menu. Use the
<and >keys to move the cursor to the desired location, and enter the name.
6)If you make a mistake, press DELETE to erase the character you just entered. Or press and hold DELETE to erase the entire line.
7) Press SELECT. The following screen |
|
Store Number | |
appears, and a cursor flashes indicating | ❚ |
that the display is ready for the number. |
|
8) Enter the phone number with the handset keypad.
When entering numbers, press PAUSE to enter a pause in the dialing sequence. The display shows a P. The pause feature is useful for long distance
NOTE calling, credit card dialing, or sequences requiring a pause between digits.
C:...MPH6928 VA OM.vp Mon Feb 14 15:27:39 2000