Memorex MPH6928 manual Important Safety Instructions

Page 3

Color profile: Disabled

Composite Default screen

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the product.

3.Unplug this product from the wall outlet before cleaning. Use a dry cloth for cleaning without liquid or aerosol cleaners.

4.Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.

5.Do not place this product on an unstable cart, stand, or table. The telephone may fall, causing serious damage to the unit.

6.Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect the product from overheating, these openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.

7.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.

8.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be damaged by persons walking on it.

9.Do not overload wall outlets and extension cords, as this can result in the risk of fire or electrical shock.

10.Never push objects of any kind into this product through cabinet slots, as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

11.To reduce the risk of electric shock, do not disassemble this product. Take it to qualified service personnel when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.

12.Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power supply cord is damaged or frayed.

B.If liquid has been spilled into the product.

C.If the product has been exposed to rain or water.

2

C:...MPH6928 VA OM.vp

Mon Feb 14 15:27:18 2000

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Reference Guide Contents Important Safety Instructions Cordless Telephone Privacy Additional Battery Safety PrecautionsWelcome FeaturesIncluded in Your Package TIPFCC Wants You To Know Important Electrical ConsiderationsRadio Interference Installation Considerations Hardwired JackModular Jack Do not alter the shape of the blades of the polarized plug Adapter Safety FeaturesDESK/TABLETOP Installation Setting the Handset Retainer for Wall Mounting Wall InstallationStandard Wall Plate Mounting Raise the antenna on the base Direct Wall Mounting MPH6928 VA OM.vp Mon Feb 14 152731 Plug the AC adapter into a standard Installing the Handset Battery Pack Low battery indicator Charging the Battery PackCleaning the Battery Contacts Initial battery chargingHandset Earpiece Volume Setting the PULSE/TONE SwitchAdjusting the Ringer and Volume Controls Handset Ringer Tone and VolumeUsing the page Feature Automatic Digital Code SecurityPaging Listen for the dial tone Making and Receiving CallsPress any button Autotalk CallFlash and Call Waiting Storing a Phone Number in MemoryDisplay is ready for the name to be entered Example, if you store a name and number Editing a Phone Number in MemoryErasing a Number from Memory Press SELECT. The following confirmation Using Memory DialingUsing Caller ID Setting Up Caller ID OptionsChain Dialing Screening Your Calls Using Cidcw Caller ID on Call WaitingCalling a Caller ID Number Reviewing Caller ID NumbersStoring a Caller ID Number Into a Memory Location Deleting All Caller ID Numbers Deleting a Caller ID NumberUsing the Tone Feature Using RedialTraveling OUT-OF-RANGE Selecting a Different ChannelQuick Reference Chart Page N E R a L S EN D S E T Memorex Page Before you read anything else, please observe the following PrecautionsControls and Functions Guía DE Referencia Indice IndiceImportantes Instrucciones DE Seguridad Carácter Privado del Teléfono Sin Cordón Medidas de Precaución Adicionales para la BateríaCaracteristicas BienvenidoLO QUE Esta Incluido EN SU Envase Importantes Consideraciones Electricas Interferencia de Radio Jack Modular Jack de Alambrado DirectoHay dos tipos de tomas telefónicas Conexion de los alambres telefónicos Caracteristicas DE Seguridad DEL AdaptadorConecte el otro extremo del cable Instalacion EN UNA Mesa O BuroLengüeta quede arriba Instalación EN LA ParedDe 120 voltios de corriente alterna en la pared Saque la antena y colóquela en posición verticalDeslice el enganche del microteléfono de nuevo en la base Instalación Standard en la ParedMPH6928 VA Sp om.vp Mon Feb 14 141543 Instalación Directa en la Pared MPH6928 VA Sp om.vp Mon Feb 14 141545 MPH6928 VA Sp om.vp Mon Feb 14 141546 Instalacion DE LA Batería EN EL Microteléfono Para Limpiar LOS Contactos DE LA Batería Para Cargar LA BateríaCarga Inicial de la Batería Indicador de que la Batería está DescargadaFijando EL Tipo DE Llamada TONO/PULSO Ajustando LOS Controles DE Timbre Y VolumenVolumen y Tono del Timbre del Microteléfono Volumen del Auricular del MicroteléfonoCódigo Digital Automático DE Seguridad USO DE LA CaracterísticaHaciendo Y Recibiendo Llamadass Botón DE Flash Para LAS Llamadas EN Espera Guardando UN Número DE Teléfono EN LA MemoriaAparecerá y un cursor indicará que aguarda Por un número Cambiando UN Número DE Teléfono EN LA Memoria Quitando UN Numero DE Teléfono DE LA Memoria Llamando a UN Número Guardado EN LA Memoria Llamada CON Número Adicional Usando EL Identificador DE LlamadasEstableciendo las Opciones de Identificación de Llamadas En Espera mientras esté hablando por Revisando Sus LlamadasTecla Caller ID. La pantalla aparecerá así Cuando escuche el tono de LlamadasLlamando a un Número del Identificador de Llamadas Revisando los Números de Identificación de LlamadasLa tecla Select y en la pantalla aparecerá Por el del Identificador de Llamadas, oprimaDespués de borrar todos los números Quitando un Número del Identificador de LlamadasSi usted llama con la modalidad Borrando Todos los Números del Identificador de LlamadasUsando EL Botón Para Repetir Llamadas Usando EL Dispositivo DE TonoCuando SE Excede EL Alcance DEL Telefono Seleccionando Otro CanalLa pared Asegúrese de que el adaptador deCorriente alterna esté bien conectado En la base y en el tomacorriente deHoras La batería de níquel-cadmio puedeTener poca carga. Cargue la batería En la unidad de base duranteC RO T E L E F O no N E R a L E S1999, Memorex es una marca registrada con Memorex Telex N.V MemorexPage ¡PRECAUCION Controles Y Funciones
Top Page Image Contents