Memorex MPH6928 manual Editing a Phone Number in Memory, Example, if you store a name and number

Color profile: Disabled Composite Default screen

NOTE

Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby. You may also press MEM to exit a memory menu at any time.

NOTE

If you select Go Back

at any time, no changes are made and the handset shows the Memory

Store screen.

9) Press SELECT. The handset beeps and
displays a confirmation screen. For	Memory 1 Stored
example, if you store a name and number
into memory location number one, the
display shows Memory 1 Stored.

10)Press MEM or return the handset to the charging cradle to exit store mode. Or, wait 20 seconds for the phone to return to standby.

EDITING A PHONE NUMBER IN MEMORY

Follow these steps to edit a phone number that you have already programmed into memory.

1) Remove the handset from the base.

2) Press and hold MEM for two seconds.
	Memory Store
The display shows the Memory Store	1> KAYSIE SCHLITZ
screen and any saved numbers.	2 MEMOREX

3)Use the : and ; keys or number keypad to select the memory location you would like to edit. The < and > keys toggle between the names display and the numbers display.

4)Press SELECT. The following screen appears > Edit Memory 1 with the memory location number that

you have selected in the displayDelete Memory 1Go Back

	You may move the > cursor down to Go Back and
NOTE	press SELECT if you would like to exit this menu.

5)With > cursor next to Edit Memory, press SELECT. The following screen appears, and a cursor flashes indicating that the display is ready for the name to be edited.

6)Use the : and ;keys to scroll through the character menu. Use the

<and >keys to move the cursor to the desired location, and enter the name.

23

C:...MPH6928 VA OM.vp Mon Feb 14 15:27:40 2000