Memorex MPH6928 manual Erasing a Number from Memory

> Edit Memory 1 Delete Memory 1 Go Back

Edit Memory 1

> Delete Memory 1 Go Back

Memory Store

1> KAYSIE SCHLITZ

2 MEMOREX

Color profile: Disabled Composite Default screen

HINT

Use the < and > keys to toggle between the names and the numbers displayed in memory.

NOTE

If you select Go Back at any time, no changes are made and the handset shows the Memory Store screen.

24

7)	Press SELECT. The following screen
		Store Number
	appears, and a cursor flashes indicating	3055551212
	that the display is ready for the number
	to be edited.
8)	Enter the phone number with the number keypad.
9)	Press SELECT. The handset beeps and
	displays a confirmation screen. For	Memory 1 Stored
	example, if you store a name and number
	into memory location number one, then
	the handset shows Memory 1 Stored.

10)The display then returns to the Memory Store screen. You may select another number to edit (return to step 3) or you may press MEM to return to standby.

ERASING A NUMBER FROM MEMORY

Use these steps to erase a programmed number from memory. Once a number is erased, that memory location may be programmed with a new number.

1) Remove the handset from the base.

2) Press and hold MEM for two seconds. The handset shows the Memory Store screen with any saved numbers displayed.

3)Use the : and ; keys or number keypad to select the memory location you would like to delete. The < and > keys toggle between the names display and the numbers display.

4) Press SELECT. The following screen appears with the memory location number that you have selected in the display.

5) Use the ; key to move the > cursor down to the Delete Memory command.

C:...MPH6928 VA OM.vp Mon Feb 14 15:27:41 2000