Memorex MPH6928 manual Chain Dialing, Using Caller ID, Setting Up Caller ID Options

Color profile: Disabled Composite Default screen

NOTE

You must subscribe to CIDCW from your phone company in order to use this feature.

26

C:...MPH6928 VA OM.vp Mon Feb 14 15:27:44 2000

CHAIN DIALING

On certain occasions after dialing a number, you may be requested to enter an access code, such as your account number. You can enter this number into a memory location for later use by doing the following.

1)Store the access code into one of the memory locations (0-9). See “Storing A Phone Number in Memory” (page 22).

2)Dial the party or service main number.

3)When you need to enter the special number, press MEM followed by the memory location (0-9).

USING CALLER ID

You must subscribe to Caller ID from your phone company in order to use this feature.

▼Setting Up Caller ID Options

There are three Caller ID setup options available; Autotalk, CIDCW, and Area Code.

AutoTalk allows you to answer the phone without pressing the TALK button. If the phone rings when Autotalk is on, simply remove the handset from the cradle and the phone automatically answers the call.

If the phone rings when Autotalk is off, you must press TALK to answer the call. This option is useful to help you screen your calls

more effectively.

CIDCW (Caller ID on Call Waiting) performs the same as regular Caller ID on a call waiting number. You must subscribe to CIDCW from your phone company in order to use this feature.

If you enter your 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.

	If your calling area requires 10-digit dialing, do
NOTE	not program this option.